260833-Q334307-20260617-NOLEA（2/2）

📎 原始文档：https://www.kdocs.cn/l/cjGFPWSqciSS

上一部分 · 返回目录

Item	Capability	Reference	Support	Status	Comment
10/1	Exchange MTU Request	[ 1] 4.3.1	C.1		C. 1: Mandatory IF GATT 4/1 "Exchange MTU", otherwise not defined.
10/2	Read Blob Request	[ 1] 4.8.2, 4.12.2	C.2		C.2: Mandatory IF GATT 4/10 "Read Long Characteristic Values", otherwise not defined.
10/4	Write Request	[ 1] 4.9.3, 4.12.3	C.4		C.4: Mandatory IF GATT 4/14 "Write Characteristic Value" OR GATT 4/21 "Write Characteristic Descriptors", otherwise Optional.
10/5	Write Command	[ 1] 4.9.1	C.5		C.5: Mandatory IF GATT 4/12 "Write without Response", otherwise Optional.
10/6	Signed Write Command	[ 1] 4.9.2	C.6		C.6: Mandatory IF GATT 4/13 "Signed Write Without Response", otherwise Optional.
10/7	Prepare Write Request	[ 1] 4.9.4, 4.9.5, 4.9.12.4	C.7		C.7: Mandatory IF GATT 4/15 "Write Long Characteristic Values" OR GATT 4/16 "Characteristic Value Reliable Writes" OR GATT 4/22 "Write Long Characteristic Descriptors" OR GATT 2/3a "Enhanced ATT bearer over LE" OR GATT 2/3b"Enhanced ATT bearer over BR/EDR", otherwise Optional.

10/8 Handle Value [ 1] 4.10.1 C.8 C.8: Mandatory IF GATT 4/17 "Notifications", otherwise Optional.
Notification

Generic Audio/Video Distribution Profile

Table 2a: GAVDP Initiator-X.Y Versions

Prerequisite: GAVDP 1/1 "Initiator"

2a/3 GAVDP 1.3 GAVDP 1.3 M

Table 3a: GAVDP Acceptor-X.Y Versions

Prerequisite: GAVDP 1/2 "Acceptor"

3a/3 GAVDP 1.3 GAVDP 1.3 M

Table 1: Role Requirements

Item	Capability	Reference	Support	Status	Comment
1/1	Initiator	[ 1] 2.2	C.1		C. 1: Mandatory to support at least one.
1/2	Acceptor	[ 1] 2.2	C.1		C. 1: Mandatory to support at least one.

1/3 Delay Reporting Initiator [ 1] 4.1.1 O

Table 2: GAVDP Procedures (Initiator)

Prerequisite: GAVDP 1/1 "Initiator"

Item	Capability	Reference	Support	Status	Comment
2/1	Connection Establishment	[ 1] 4.1.1	M
2/4	Start Streaming	[ 1] 4.1.2	M
2/5	Connection Release	[ 1] 4.1.3	M
2/6	Signaling Control-Abort	[ 1] 4.1.6	M

Table 4: AVDTP Procedures (Initiator)

Prerequisite: GAVDP 1/1 "Initiator"

Item	Capability	Reference	Support	Status	Comment
4/1	Stream discover command	[ 1] 3.1.9	M
4/2	Stream get capabilities command	[ 1] 3.1.9	M
4/3	Set configuration command	[ 1] 3.1.9	M
4/4	Open stream command	[ 1] 3.1.9	M
4/5	Start stream command	[ 1] 3.1.9	M
4/6	Close stream command	[ 1] 3.1.9	M
4/7	Abort stream command	[ 1] 3.1.9	M
4/8	Stream get all capabilities command	[ 1] 3.1.1	M

Table 3: GAVDP Procedures (Acceptor)

Prerequisite: GAVDP 1/2 "Acceptor"

Item	Capability	Reference	Support	Status	Comment
3/1	Connection Establishment	[ 1] 4.1.1	M
3/4	Start Streaming	[ 1] 4.1.2	M
3/5	Connection Release	[ 1] 4.1.3	M
3/6	Signaling Control-Abort	[ 1] 4.1.6	M

Table 5: AVDTP Procedures (Acceptor)

Prerequisite: GAVDP 1/2 "Acceptor"

5/1	Stream discover response	[ 1] 3.1.9	M
5/2	Stream get capabilities response	[ 1] 3.1.9	M
5/3	Set configuration response	[ 1] 3.1.9	M
5/4	Open stream response	[ 1] 3.1.9	M
5/5	Start stream response	[ 1] 3.1.9	M
5/6	Close stream response	[ 1] 3.1.9	M
5/7	General reject message	[ 1] 3.1.9	M
5/8	Abort stream response	[ 1] 3.1.9	M
5/9	Stream get all capabilities response	[ 1] 3.1.1	M

Hands-Free Profile

Table 0a: AG X.Y Versions

Prerequisite: HFP 1/1 "Audio Gateway (AG)"

Item	Capability	Reference	Support	Status	Comment
0a/5	Hands-Free Profile 1.9	[5]	C.1		C. 1: Mandatory to support one and only one.

Table 0b: HF X.Y Versions

Prerequisite: HFP 1/2 "Hands-Free (HF)"

Table 1: Role Requirements

Item	Capability	Reference	Support	Status	Comment
1/1	Audio Gateway (AG)	[ 1] 2.2	C.1		C. 1: Mandatory to support at least one.
1/2	Hands-Free (HF)	[ 1] 2.2	C.1		C. 1: Mandatory to support at least one.

Table 2: Capabilities of the AG

Prerequisite: HFP 1/1 "Audio Gateway (AG)"

Item	Capability	Reference	Support	Status	Comment
2/1	Connection management	[ 1] 4.2, 4.3	M
2/2	Phone status information	[ 1] 4.4, 4.5, 4.6, 4.7, 4.8, 4.9, 4.10	M
2/3	Audio Connection handling	[ 1] 4.11, 4.12	M

2/3b	eSCO support in Audio Connection	[ 1] 5.7. 1,[5] 6.7.1	M
2/4b	Accept an incoming voice call (no in-band ring)	[ 1] 4.13	C.1		C. 1: Mandatory to support at least one.
2/6	Terminate a call	[ 1] 4.15	M
2/7	Audio Connection transfer during an ongoing call	[ 1] 4. 16, 4.17	M
2/8	Place a call with the phone number supplied by the HF	[ 1] 4.18	M
2/9	Place a call using memory dialing	[ 1] 4.19	M
2/10	Place a call to the last number dialed	[ 1] 4.20	M
2/11	Call Waiting notification	[ 1] 4.21	M
2/13	Calling Line Identification (CLI)	[ 1] 4.23	M
2/17	Ability to transmit DTMF codes	[ 1] 4.27	M
2/20	Subscriber Number Information	[ 1] 4.30	M
2/21a	Enhanced Call Status	[ 1] 4.31	C.4		C.4: Mandatory to support one and only one.
2/23	Individual Indicator Activation	[ 1] 4.34,[4] 4.35	M
2/27	Support CVSD eSCO S4 setting	[2] 5.7.3,[5] 6.7.3	M
2/28	Reserved Fields and RFU Bits	[5] 1.4.2	C.15		C. 15: Excluded IF HFP 0a/3 "Hands-Free Profile 1.7" OR HFP 0a/4 "Hands-Free Profile 1.8", otherwise Mandatory.

Table 3: Capabilities of the HF

Prerequisite: HFP 1/2 "Hands-Free (HF)"

Item	Capability	Reference	Support	Status	Comment
3/1	Connection management	[ 1] 4.2, 4.3	M
3/2a	Phone status information (service and call indicators)	[ 1] 4.4, 4.10	M
3/3	Audio Connection handling	[ 1] 4.11, 4.12	M
3/3b	eSCO support in Audio Connection	[ 1] 5.7. 1,[5] 6.7.1	M
3/3c	Codec Negotiation	[ 1] 4.11	C.5		C.5: Mandatory IF HFP 3/24 "Wide Band Speech service" OR HFP 3/28 "Super Wide Band Speech", otherwise Optional.
3/4a	Accept an incoming voice call (inband ring)	[ 1] 4.13	M
3/4b	Accept an incoming voice call (no in-band ring)	[ 1] 4.13	M
3/5	Reject an incoming voice call	[ 1] 4.14	M
3/6	Terminate a call	[ 1] 4.15	M
3/7	Audio Connection transfer during an ongoing call	[ 1] 4. 16, 4.17	M

3/12	Three Way Calling	[ 1] 4.22	O
3/12b	Three way calling (AT+CHLD values 1 and 2)	[ 1] 4.22	C.1		C. 1: Mandatory IF HFP 3/12 "Three Way Calling", otherwise Excluded.
3/13	Calling Line Identification (CLI)	[ 1] 4.23	O
3/14	Echo Canceling (EC) and Noise Reduction (NR)	[ 1] 4.24	O
3/15	Voice recognition activation/deactivation	[ 1] 4.25	O
3/18a	Remote audio volume controlspeaker	[ 1] 4.28,1	O
3/18c	Volume level synchronizationspeaker	[ 1] 4.28.2	C.3		C.3: Mandatory IF HFP 3/18a "Remote audio volume controlspeaker" OR HFP 3/18b "Remote audio volume controlmicrophone", otherwise Optional.
3/24	Wide Band Speech service	[ 1] 5.7,[5] 6.7	O
3/26	Support CVSD eSCO S4 setting	[2] 5.7.3,[5] 6.7.3	M

3/27 Reserved Fields and RFU Bits [5] 1.4.2 C.12 C. 12: Excluded IF HFP 0b/3 "Hands-Free Profile 1.7" OR HFP
0b/4 "Hands-Free Profile 1.8", otherwise Mandatory.

Table 4: Requirements towards the Link Control Procedures of the Serial Port Profile (AG and HF)

Item	Capability	Reference	Support	Status	Comment
4/1	CVSD audio coding over SCO	[ 1] 2.3	M
4/2	mSBC audio coding over	[ 1] 5.7.4,[5]	C.1		C. 1: Mandatory IF HFP 2/24 "Wide Band Speech service" OR HFP
	eSCO	6.7.4			3/24 "Wide Band Speech service", otherwise Excluded.
4/3	CVSD audio coding over eSCO (Initiating)	[ 1] 5.7.3,[5] 6.7.3	M
4/4	CVSD audio coding over eSCO (Accepting)	[ 1] 5.7.3,[5] 6.7.3	M

Table 5a: RFCOMM Requirements (AG and HF)

Item	Capability	Reference	Support	Status	Comment
5a/1	Initialize RFCOMM Session	[2] 5,[5] 6.1	M

5a/2 Respond to Initialization of an RFCOMM Session [2] 5,[5] 6.1 M

Table 6: GAP Requirements (AG)

Prerequisite: HFP 1/1 "Audio Gateway (AG)"

Item	Capability	Reference	Support	Status	Comment
6/1	Bondable mode	[ 1] 6. 1,[5] 7.1	M

6/2 Initiation of general inquiry [ 1] 6.3,[5] 7.3 M
Table 7: Requirements towards the Generic Access Profile (HF)
Prerequisite: HFP 1/2 "Hands-Free (HF)"

Item	Capability	Reference	Support	Status	Comment
7/1	General discoverable mode	[ 1] 6. 1,[5] 7.1	M

Table 7b: BB and L2CAP Requirements

Item	Capability	Reference	Support	Status	Comment
7b/1	2-EV3 packet type	[ 1] 3	M
7b/3	Data Channel Initiator	[2] 5.2,[5] 6.2	M
7b/4	Data Channel Acceptor	[2] 5.2,[5] 6.2	M

Table 7c: LC3 Requirements

Prerequisite: HFP 2/29 "Super Wide Band Speech" OR HFP 3/28 "Super Wide Band Speech"
Item Capability Reference Support Status Comment

Table 8: Additional Hands-Free Capabilities

Item Capability Reference Support Status Comment

Isochronous Adaptation Layer

Table 1: Supported Features

Item	Capability	Reference	Support	Status	Comment
1/1	Segmentable Framed Data Traffic	[ 1] 2.2	M
1/2	Unframed Data Traffic	[ 1] 2.1	M
1/3	Connected Isochronous Stream Adaptation	[ 1] 2	C.1		C. 1: Mandatory IF LL 9/31 "Connected Isochronous Stream-Central" OR LL 9/32 "Connected Isochronous Stream-Peripheral", otherwise Excluded.
1/4	Broadcast Isochronous Stream Adaptation	[ 1] 2	C.2		C.2: Mandatory IF LL 9/33 "Isochronous Broadcaster", otherwise Excluded.
1/5	Synchronized Receiver Adaptation	[ 1] 2	C.3		C.3: Mandatory IF LL 9/34 "Synchronized Receiver", otherwise Excluded.

Interoperability Test Suite

Logical Link Control and Adaptation Protocol

Table 0: L2CAP Transport Configuration

Item	Capability	Reference	Support	Status	Comment
0/3	BR/EDR/LE	[6] 1.1	C.3, C.4		C.3: Mandatory IF CORE 41/3 "BR/EDR/LE Core Configuration", otherwise Optional. C.4: Mandatory to support one and only one.

Table 1: Role Requirements

1/1	Data Channel Initiator	[ 1] 2	C.3		C.3: Optional IF L2CAP 0/1 "BR/EDR" OR L2CAP 0/3 "BR/EDR/LE", otherwise Excluded.
1/2	Data Channel Acceptor	[ 1] 2	C.1		C. 1: Mandatory IF L2CAP 0/1 "BR/EDR" OR L2CAP 0/3 "BR/EDR/LE", otherwise Excluded.
1/3	LE Central	[4] 2	C.2		C.2: Mandatory to support at least one IF L2CAP 0/2 "LE" OR L2CAP 0/3 "BR/EDR/LE", otherwise Excluded.

1/4 LE Peripheral [4] 2 C.2 C.2: Mandatory to support at least one IF L2CAP 0/2 "LE" OR L2CAP 0/3
"BR/EDR/LE", otherwise Excluded.

Table 2: General Operation

Item	Capability	Reference	Support	Status	Comment
2/1	L2CAP Signaling channel over BR/EDR	[ 1] 2.2	C.16		C. 16: Mandatory IF L2CAP 0/1 "BR/EDR" OR L2CAP 0/3 "BR/EDR/LE", otherwise Excluded.
2/2	Configuration process	[ 1] 7.1	C.16		C. 16: Mandatory IF L2CAP 0/1 "BR/EDR" OR L2CAP 0/3 "BR/EDR/LE", otherwise Excluded.
2/3	Connection-oriented data channel over BR/EDR	[ 1] 2.2	C.16		C. 16: Mandatory IF L2CAP 0/1 "BR/EDR" OR L2CAP 0/3 "BR/EDR/LE", otherwise Excluded.
2/4	Send echo request	[ 1] 4.8	C.17		C. 17: Optional IF L2CAP 0/1 "BR/EDR" OR L2CAP 0/3 "BR/EDR/LE", otherwise Excluded.
2/5	Send echo response	[ 1] 4.9	C.16		C. 16: Mandatory IF L2CAP 0/1 "BR/EDR" OR L2CAP 0/3 "BR/EDR/LE", otherwise Excluded.
2/6	Send information request	[ 1] 4.10	C.11		C. 11: Mandatory IF L2CAP 2/29 "AMP", otherwise Optional IF L2CAP 0/1 "BR/EDR" OR L2CAP 0/3 "BR/EDR/LE", otherwise Excluded.
2/7	Send information response	[ 1] 4.11	C.16		C. 16: Mandatory IF L2CAP 0/1 "BR/EDR" OR L2CAP 0/3 "BR/EDR/LE", otherwise Excluded.
2/13	Streaming Mode	[2] 8.7	O
2/21	Optional use of Streaming Mode	[2] 8.7	C.4		C.4: Mandatory to support at least one IF L2CAP 2/13 "Streaming Mode", otherwise Excluded.
2/40	L2CAP LE Signaling channel	[4] 2. 1, 2.2	C.13		C. 13: Mandatory IF L2CAP 0/2 "LE" OR L2CAP 0/3 "BR/EDR/LE", otherwise Excluded.
2/41	Command reject	[4] 4.10	C.29		C.29: Mandatory IF L2CAP 2/1 “L2CAP Signaling channel over BR/EDR”OR L2CAP 2/40 “L2CAP LE Signaling channel”, otherwise Excluded
2/43	Send Connection Parameter Update Response	[4] 4.21	C.15		C. 15: Mandatory IF L2CAP 1/3 "LE Central", otherwise Excluded.

Table 3: Configurable Parameters

Item	Capability	Reference	Support	Status	Comment
3/1	RTX timer	[ 1] 6.2.1	M
3/2	ERTX timer	[ 1] 6.2.2	C.4		C.4: Mandatory IF L2CAP 0/1 "BR/EDR" OR L2CAP 0/3 "BR/EDR/LE", otherwise Excluded.
3/3	Minimum MTU size of 48 octets	[ 1] 5.1	C.4		C.4: Mandatory IF L2CAP 0/1 "BR/EDR" OR L2CAP 0/3 "BR/EDR/LE", otherwise Excluded.
3/4	MTU size larger than 48 octets	[ 1] 5.1	C.5		C.5: Optional IF L2CAP 0/1 "BR/EDR" OR L2CAP 0/3 "BR/EDR/LE", otherwise Excluded.

3/5	Flush timeout value for reliable channel	[ 1] 5.2	C.4		C.4: Mandatory IF L2CAP 0/1 "BR/EDR" OR L2CAP 0/3 "BR/EDR/LE", otherwise Excluded.
3/6	Flush timeout value for unreliable channel	[ 1] 5.2	C.5		C.5: Optional IF L2CAP 0/1 "BR/EDR" OR L2CAP 0/3 "BR/EDR/LE", otherwise Excluded.

3/12 Minimum MTU size of 23 octets [4] 5.1 C.6 C.6: Mandatory IF L2CAP 0/2 "LE" OR L2CAP 0/3 "BR/EDR/LE",
otherwise Excluded.
Table 4: Security Aspects (LE)
Prerequisite: L2CAP 0/2 "LE" OR L2CAP 0/3 "BR/EDR/LE"

Item	Capability	Reference	Support	Status	Comment
4/1	Detect insufficient authentication	[ 1] 10. 1, 10.2	O

4/3 Detect insufficient encryption [ 1] 10. 1, 10.2 O

Table 5: Security Aspects (BR/EDR)

Prerequisite: L2CAP 0/1 "BR/EDR" OR L2CAP 0/3 "BR/EDR/LE"

Item	Capability	Reference	Support		Status	Comment
5/1	Detect insufficient authentication	[ 1] 10. 1, 10.2	O
Low Complexity Communication Codec
Table 0: X.Y Versions
Item	Capability Reference	Support		Status		Comment

0/1 LC3 v1 .0 [ 1] M

Table 1: X.Y.Z Versions

1/1 LC3 v1 .0.1 [2] O

Table 2: Role Requirements

Item	Capability	Reference	Support	Status	Comment
2/1	LC3 Encoder	[ 1] 2.2	C.1		C. 1: Mandatory to support at least one.
2/2	LC3 Decoder	[ 1] 2.4	C.1		C. 1: Mandatory to support at least one.
2/3	LC3 EncoderDecoder	[ 1] 2.2, 2.4	C.2		C.2: Optional IF LC3 2/1 "LC3 Encoder" AND LC3 2/2 "LC3 Decoder", otherwise Excluded.

Table 3: Encoder Features

Prerequisite: LC3 2/1 "LC3 Encoder"

Item	Capability	Reference	Support	Status	Comment
3/1	Narrow Band (8 kHz)	[ 1] 2.1	C.1		C. 1: Mandatory to support at least one of the encoder features.
3/2	Wideband (16 kHz)	[ 1] 2.1	C.1		C. 1: Mandatory to support at least one of the encoder features.
3/3	Semi-Superwideband (24 kHz)	[ 1] 2.1	C.1		C. 1: Mandatory to support at least one of the encoder features.

3/4	Superwideband (32 kHz)	[ 1] 2.1	C.1		C. 1: Mandatory to support at least one of the encoder features.
3/5	Full Band (44 .1 kHz)	[ 1] 2.1	C.1		C. 1: Mandatory to support at least one of the encoder features.

3/6 Full Band (48 kHz) [ 1] 2.1 C.1 C. 1: Mandatory to support at least one of the encoder features.

Table 4: Frame Interval

Prerequisite: LC3 2/1 "LC3 Encoder"

Item	Capability	Reference	Support	Status	Comment
4/1	7.5 ms	[ 1] 2.1	C.1		C. 1: Mandatory to support at least one.

4/2 10 ms [ 1] 2.1 C.1 C. 1: Mandatory to support at least one.

Table 5: Decoder Features

Prerequisite: LC3 2/2 "LC3 Decoder"

Item	Capability	Reference	Support	Status	Comment
5/1	Narrow Band (8 kHz)	[ 1] 2.1	C.1		C. 1: Mandatory to support at least one.
5/2	Wideband (16 kHz)	[ 1] 2.1	C.1		C. 1: Mandatory to support at least one.
5/3	Semi-Superwideband (24 kHz)	[ 1] 2.1	C.1		C. 1: Mandatory to support at least one.
5/4	Superwideband (32 kHz)	[ 1] 2.1	C.1		C. 1: Mandatory to support at least one.
5/5	Full Band (44 .1 kHz)	[ 1] 2.1	C.1		C. 1: Mandatory to support at least one.

5/6 Full Band (48 kHz) [ 1] 2.1 C.1 C. 1: Mandatory to support at least one.

Table 6: Frame Interval

Prerequisite: LC3 2/2 "LC3 Decoder"

Item	Capability	Reference	Support	Status	Comment
6/1	7.5 ms	[ 1] 2.1	C.1		C. 1: Mandatory to support at least one.

6/2 10 ms [ 1] 2.1 C.1 C. 1: Mandatory to support at least one.

LE LL Security

Table 1: LE Security

Item	Capability	Reference	Support	Status	Comment
1/1	Counter with Cipher Block Chaining-Message Authentication Code (CCM) Mode	[ 1] 2	O

1/2 Group Session Key Derivation h8 [ 1] 1.1 O

Table 2: LL Requirements

Item	Capability	Reference	Support	Status	Comment
2/1	LE Encryption	[ 1] 2	C.1		C. 1: Mandatory IF LESEC 1/1 "Counter with Cipher Block ChainingMessage Authentication Code (CCM) Mode" OR LESEC 1/2 "Group Session Key Derivation h8", otherwise not defined.
2/2	Receiving Encrypted Broadcast Isochronous Stream	[ 1] 1.1	C.2		C.2: Mandatory to support at least one IF LESEC 1/2 "Group Session Key Derivation h8", otherwise not defined.

2/3 Transmitting Encrypted Broadcast Isochronous Stream
[ 1] 1.1 C.2 C.2: Mandatory to support at least one IF LESEC 1/2 "Group Session Key Derivation h8", otherwise not defined.

Link Layer

Table 1: Controller States/Roles

Item	Capability	Reference	Support	Status	Comment
1/1	Advertising State	[ 1] 4.4.2	C.1		C. 1: Mandatory to support at least one.
1/2	Scanning State	[ 1] 4.4.3	C.1		C. 1: Mandatory to support at least one.
1/3	Initiating State	[ 1] 4.4.4	C.1		C. 1: Mandatory to support at least one.
1/3a	Synchronized State	[6] 4.4.5	C.4		C.4: Mandatory IF CORE 1a/51 "Controller Core v5 .1 or later" AND (LL 9/27 "Periodic Advertising Sync Transfer-Recipient" OR LL 4/8 "Scanning for Periodic Advertising" OR LL 9/34 "Synchronized Receiver"), otherwise Excluded.
1/4	Peripheral Role	[ 1] 4.5.5	C.3		C.3: Optional IF LL 1/1 "Advertising State", otherwise Excluded.
1/5	Central Role	[ 1] 4.5.4	C.2		C.2: Mandatory IF LL 1/3 "Initiating State", otherwise Excluded.

1/6 Isochronous [7] 4.4.6 C.5 C.5: Mandatory IF LL 9/33 "Isochronous Broadcaster", otherwise Excluded. Broadcasting State

Table 2: Device Address Types

Item	Capability	Reference		Support	Status	Comment
2/1	Public Address	[ 1]	1.3	C.1		C. 1: Mandatory to support at least one.
2/2	Random Address	[ 1]	1.3	C.1		C. 1: Mandatory to support at least one.
2/3	Static Address	[3]	1.3.2.1	C.3		C.3: Mandatory to support at least one IF LL 2/2 "Random Address", otherwise Excluded.

Table 3: Protocol Advertising Features

Prerequisite: LL 1/1 "Advertising State"

Item	Capability	Reference	Support	Status	Comment
3/1	Non-connectable and non scannable undirected events	[ 1] 4.4.2.6 , [ 12] 4.4.2.13	C.1		C. 1: Mandatory IF LL 3/10 "Periodic Advertising" OR NOT LL 1/4 "Peripheral Role", otherwise Optional.
3/1a	Non-connectable and non scannable directed events	[6] 4.4.2.9 , [ 12] 4.4.2.13	C.16		C. 16: Mandatory IF LL 3/1 "Non-connectable and non-scannable undirected events" AND LL 3/9 "Extended Advertising", otherwise Excluded.
3/2	Connectable and scannable undirected events	[ 1] 4.4.2.3 , [ 12] 4.4.2.13	C.3		C.3: Mandatory IF LL 1/4 "Peripheral Role", otherwise Excluded.
3/3	Advertising data	[ 1] 4.4.2.3 , 4.4.2.5 , 4.4.2.6	M
3/4	Connectable directed events	[ 1] 4.4.2.4 , [ 12] 4.4.2.13	C.3		C.3: Mandatory IF LL 1/4 "Peripheral Role", otherwise Excluded.
3/4a	Low Duty Cycle Direct Advertising	[ 1] 4.4.2.4	O

3/4b	Connectable undirected events	[6] 4.4.2.7 , [ 12] 4.4.2.13	C.17		C. 17: Mandatory IF LL 3/4 "Connectable directed events" AND LL 3/9 "Extended Advertising", otherwise Excluded.
3/5	Scannable undirected events	[ 1] 4.4.2.5 , [ 12] 4.4.2.13	O
3/5a	Scannable directed events	[6] 4.4.2.8 , [ 12] 4.4.2.13	C.18		C. 18: Mandatory IF LL 3/5 "Scannable undirected events" AND LL 3/9 "Extended Advertising", otherwise Excluded.
3/6	Sending scan responses	[ 1] 4.4.2.3 , 4.4.2.5	C.2		C.2: Mandatory IF LL 1/4 "Peripheral Role", otherwise Optional.
3/7	Accepting connection requests	[ 1] 4.4.2.3 , 4.4.2.4	C.3		C.3: Mandatory IF LL 1/4 "Peripheral Role", otherwise Excluded.
3/8	Filtering policies	[ 1] 4.3.2	O
3/9	Extended Advertising	[4] 4.6.12	C.6		C.6: Mandatory IF LL 9/41 "LE Extended Advertising", otherwise Excluded.
3/10	Periodic Advertising	[4] 4.4.2.12	C.12		C. 12: Mandatory IF LL 9/42 "LE Periodic Advertising", otherwise Excluded.
3/12	Sending Tx Power in advertisements	[4] 2.3.4.7	C.7		C.7: Optional IF LL 3/9 "Extended Advertising", otherwise Excluded.
3/12a	Sending Channel Map Update Indication in ACAD	[9] 1.20	C.11		C. 11: Optional IF LL 3/10 "Periodic Advertising", otherwise Excluded.

Table 4: Protocol Scanning Features

Prerequisite: LL 1/2 "Scanning State"

Item	Capability	Reference	Support	Status	Comment
4/1	Passive Scanning	[ 1] 4.4.3.1	C.1		C. 1: Mandatory to support at least one.
4/2	Receiving Advertising Data	[ 1] 4.4.3.1 , 4.4.3.2	M
4/3	Active Scanning	[ 1] 4.4.3.2	C.1		C. 1: Mandatory to support at least one.
4/4	Backoff Procedure	[ 1] 4.4.3.2	C.2		C.2: Mandatory IF LL 4/3 "Active Scanning", otherwise Excluded.
4/5	Filtering Policies	[ 1] 4.3.3	M
4/6	Extended Scanner filter policies	[3] 4.4.3	O
4/6a	Periodic Sync Establishment Filtering Policies	[4] 4.6.13	C.6		C.6: Mandatory IF LL 4/8 "Scanning for Periodic Advertising", otherwise Excluded.
4/7	Extended Scanning	[4] 4.6.12	C.4		C.4: Mandatory IF LL 9/41 "LE Extended Advertising", otherwise Excluded.

4/8 Scanning for Periodic Advertising [4] 4.4.3.4 C.5 C.5: Mandatory IF LL 9/42 "LE Periodic Advertising",
otherwise Excluded.

Table 4a: Protocol Scanning Events

Prerequisite: LL 1/2 "Scanning State"

Item	Capability	Reference	Support	Status	Comment
4a/1	Non-connectable and non scannable undirected events	[ 1] 4.4.2.6 , [ 12] 4.4.3.7	C.1		C. 1: Mandatory IF LL 4/8 "Scanning for Periodic Advertising" OR NOT (LL 1/5 "Central Role" OR LL 4/3 "Active Scanning"), otherwise Optional.

4a/2	Non-connectable and non scannable directed events	[6] 4.4.2.9 , [ 12] 4.4.3.7	C.2		C.2: Mandatory IF LL 4/7 "Extended Scanning" AND LL 4a/1 "Nonconnectable and non-scannable undirected events", otherwise Excluded.
4a/3	Scannable undirected events	[ 1] 4.4.2.5 , [ 12] 4.4.3.7	C.3		C.3: Mandatory IF LL 4/3 "Active Scanning", otherwise Optional.
4a/4	Scannable directed events	[6] 4.4.2.8 , [ 12] 4.4.3.7	C.4		C.4: Mandatory IF LL 4/7 "Extended Scanning" AND LL 4a/3 "Scannable undirected events", otherwise Excluded.
4a/5	Connectable directed events	[ 1] 4.4.2.4 , [ 12] 4.4.3.7	C.5		C.5: Mandatory IF LL 1/5 "Central Role", otherwise Optional.
4a/6	Connectable undirected events	[6] 4.4.2.7 , [ 12] 4.4.3.7	C.6		C.6: Mandatory IF LL 4/7 "Extended Scanning" AND LL 4a/5 "Connectable directed events", otherwise Excluded.
4a/7 Connectable and scannable undirected events		[ 1] 4.4.2.3 , [ 12] 4.4.3.7	C.7	C.7: Mandatory IF LL 1/5 "Central Role" OR LL 4/3 "Active Scanning", otherwise Optional.

Table 5: Protocol Initiating Features

Prerequisite: LL 1/3 "Initiating State"

Item	Capability	Reference	Support	Status	Comment
5/1	Requesting Connections	[ 1] 4.4.4	M
5/2	Requesting to Directed Advertising	[ 1] 4.4.4	M
5/3	Initiator Filtering	[ 1] 4.3.4	M

5/4 Requesting connections using extended [4] 4.6.12 C.1 C. 1: Mandatory IF LL 9/41 "LE Extended Advertising",
advertising otherwise Excluded.

Table 6: Protocol Peripheral Role Features

Prerequisite: LL 1/4 "Peripheral Role"

Item	Capability	Reference	Support	Status	Comment
6/1	Peripheral Transmissions	[ 1] 4.5. 1, 4.5.5, 4.5.6	M
6/2	Acknowledgement Scheme	[ 1] 4.5.9	M
6/3	Unknown Response	[ 1] 5.1.4, 2.4.2	M
6/4	Responding in Feature Setup	[ 1] 5.1.4.1	M
6/4a	Requesting Feature Setup	[ 1] 5.1.4.2	C.18		C. 18: Mandatory IF LL 9/5 "Peripheral-initiated Features Exchange"OR LL 9/55 "LL Extended Feature Set", otherwise Excluded.
6/5	Sending Data (Device supports data output from a Host)	[ 1] 4.5. 1, 4.5.6	M
6/6	Receiving Data (Device supports data input to a Host)	[ 1] 4.5. 1, 4.5.6	M
6/7	More Data	[ 1] 4.5.6	O
6/10	Accepting Parameter Update	[ 1] 5.1.1	M
6/10a	Initiating Connection Parameter Request	[ 1] 5.1	C.2		C.2: Mandatory IF LL 9/3 "Connection Parameters Request procedure", otherwise Excluded.
6/10b	Accepting Connection Parameter Request	[ 1] 5.1	C.2		C.2: Mandatory IF LL 9/3 "Connection Parameters Request procedure", otherwise Excluded.

6/11	Accepting Channel Map Update	[ 1] 5.1.2	M
6/12	Encryption Start	[ 1] 5.1.3	C.17		C. 17: Mandatory IF LL 9/1 "LE Encryption", otherwise Excluded.
6/13	Connection Control Timer	[ 1] 5.2	M
6/14	Sending Termination	[ 1] 5.1.6	M
6/15	Accepting Termination	[ 1] 5.1.6	M
6/16	Connection Supervision Timer	[ 1] 4.5.2	M
6/18	Peripheral Pause Encryption	[ 1] 5.1.3	C.17		C. 17: Mandatory IF LL 9/1 "LE Encryption", otherwise Excluded.
6/19	Peripheral Version Exchange	[ 1] 5.1.5	M
6/20	Peripheral listens to multiple packets per connection event	[ 1] 4.5.7	O
6/22	Data Length Update Procedure	[3] 5.1.9	C.4		C.4: Mandatory IF LL 9/6 "LE Data Packet Length Extension", otherwise Excluded.
6/23a	PHY Update procedure	[4] 5.1.10	C.9		C.9: Mandatory IF CORE 1a/50 "Controller Core v5 .0 or later" AND LL 9/6a "Multiple PHYs", otherwise Optional IF CORE 1a/50 "Controller Core v5 .0 or later", otherwise Excluded.
6/30	Receiving Long Control PDUs	[6] 4.5.11	C.14		C. 14: Mandatory IF LL 6/28 "Accepting Periodic Advertising Sync Transfer Procedure" OR LL 9/32 "Connected Isochronous StreamPeripheral", otherwise Excluded.

6/32 Bi-Directional Data in Single [7] 4.5.14 C.16 C. 16: Mandatory IF LL 9/32 "Connected Isochronous Stream
Connected Isochronous Stream Peripheral", otherwise Excluded.

Table 7: Protocol Central Role Features

Prerequisite: LL 1/5 "Central Role"

Item	Capability	Reference	Support	Status	Comment
7/1	Central Transmissions	[ 1] 4.5. 1, 4.5.4, 4.5.6	M
7/2	Acknowledgement Scheme	[ 1] 4.5.9	M
7/3	Unknown Responses	[ 1] 5.1.4, 2.4.2	M
7/4	Requesting Feature Setup	[ 1] 5.1.4.1	M
7/4a	Responding in Feature Setup	[ 1] 5.1.4.2	C.18		C. 18: Mandatory IF LL 9/5 "Peripheral-initiated Features Exchange" OR LL 9/55 "LL Extended Feature Set", otherwise Excluded.
7/5	Sending Data (Device supports data output from a Host)	[ 1] 4.5. 1, 4.5.6	M
7/6	Receiving Data (Device supports data input to a Host)	[ 1] 4.5. 1, 4.5.6	M
7/7	More Data	[ 1] 4.5.6	O
7/10	Requesting Parameter Update	[ 1] 5.1.1	M
7/10a	Initiating Connection Parameter Request	[ 1] 5.1	C.2		C.2: Mandatory IF LL 9/3 "Connection Parameters Request procedure", otherwise Excluded.

7/10b	Accepting Connection Parameter Request	[ 1] 5.1	C.2		C.2: Mandatory IF LL 9/3 "Connection Parameters Request procedure", otherwise Excluded.
7/11	Requesting Channel Map Update	[ 1] 5.1.2	M
7/12	Encryption Start	[ 1] 5.1.3	C.17		C. 17: Mandatory IF LL 9/1 "LE Encryption", otherwise Excluded.
7/13	Connection Control Timer	[ 1] 5.2	M
7/14	Sending Termination	[ 1] 5.1.6	M
7/15	Accepting Termination	[ 1] 5.1.6	M
7/16	Connection Supervision Timer	[ 1] 4.5.2	M
7/19	Central Pause Encryption	[ 1] 5.1.3	C.17		C. 17: Mandatory IF LL 9/1 "LE Encryption", otherwise Excluded.
7/20	Central Version Exchange	[ 1] 5.1.5	M
7/22	Data Length Update Procedure	[3] 5.1.9	C.4		C.4: Mandatory IF LL 9/6 "LE Data Packet Length Extension", otherwise Excluded.
7/23a	PHY Update procedure	[4] 5.1.10	C.9		C.9: Mandatory IF CORE 1a/50 "Controller Core v5 .0 or later" AND LL 9/6a "Multiple PHYs", otherwise Optional IF CORE 1a/50 "Controller Core v5 .0 or later", otherwise Excluded.

7/29 Sending Long Control PDUs
[6] 4.5.11 C.13 C. 13: Mandatory IF (LL 7/26 "Initiating Periodic Advertising Sync Transfer Procedure for Local Periodic Advertising" OR LL 7/27 "Initiating Periodic Advertising Sync Transfer Procedure for Remote Periodic Advertising" OR LL 9/31 "Connected Isochronous Stream-Central"), otherwise Excluded.

Table 8: Physical Channels

Item	Capability	Reference		Support	Status	Comment
8/1	General-purpose channels	[ 1]	1.4.1	C.1		C. 1: Mandatory IF LL 1/4 "Peripheral Role" OR LL 1/5 "Central Role" OR LL 1/6 "Isochronous Broadcasting State" OR LL 3/9 "Extended Advertising", otherwise Excluded.
8/2	Primary Advertising channels	[ 1]	1.4.1	M

8/3 Support Data channel [ 1] 4.5.8 C.2 C.2: Mandatory IF LL 1/4 "Peripheral Role" OR LL 1/5 "Central Role" OR LL
selection algorithm 9/10 "Channel Selection Algorithm #2", otherwise Excluded.

Table 9: Supported Features

Item	Capability	Reference	Support	Status	Comment
9/1	LE Encryption	[ 1] 4.6.1	O
9/3	Connection Parameters Request procedure	[ 1] 4.6.2	C.2		C.2: Optional IF LL 9/4 "Extended Reject Indication", otherwise Excluded.
9/4	Extended Reject Indication	[ 1] 4.6.3	O
9/5	Peripheral-initiated Features Exchange	[ 1] 4.6.4	O
9/6	LE Data Packet Length Extension	[3] 4.6.6	O

9/6a	Multiple PHYs	[4] 4.6.9	C.6		C.6: Mandatory IF LL 9/7 "LE 2M PHY" OR LL 9/9 "LE Coded PHY", otherwise Excluded.
9/7	LE 2M PHY	[3] 2.1	C.5		C.5: Optional IF CORE 1a/50 "Controller Core v5 .0 or later" AND LL 9/4 "Extended Reject Indication", otherwise Excluded.
9/8	Asymmetric connections	[4] 4.6.9.1	C.7		C.7: Optional IF LL 9/6a "Multiple PHYs", otherwise Excluded.
9/10	Channel Selection Algorithm #2	[4] 4.6.14	C.10		C. 10: Optional IF CORE 1a/50 "Controller Core v5 .0 or later", otherwise not defined.
9/30	Sleep Clock Accuracy Updates	[6] 4.6.25	C.37		C.37: Optional IF CORE 1a/51 "Controller Core v5 .1 or later", otherwise Excluded.
9/31	Connected Isochronous Stream -Central	[7] 4.6.27	C.28		C.28: Optional IF CORE 1a/52 "Controller Core v5 .2 or later" AND LL 1/5 "Central Role" AND LL 9/4 "Extended Reject Indication" AND LL 9/10 "Channel Selection Algorithm #2" AND LL 9/30 "Sleep Clock Accuracy Updates", otherwise Excluded.
9/32	Connected Isochronous Stream -Peripheral	[7] 4.6.27	C.29		C.29: Optional IF CORE 1a/52 "Controller Core v5 .2 or later" AND LL 1/4 "Peripheral Role" AND LL 9/4 "Extended Reject Indication" AND LL 9/10 "Channel Selection Algorithm #2" AND LL 9/30 "Sleep Clock Accuracy Updates", otherwise Excluded.
9/33	Isochronous Broadcaster	[7] 4.6.28	C.30		C.30: Optional IF CORE 1a/52 "Controller Core v5 .2 or later" AND LL 9/42 "LE Periodic Advertising", otherwise Excluded.
9/34	Synchronized Receiver	[7] 4.6.29	C.30		C.30: Optional IF CORE 1a/52 "Controller Core v5 .2 or later" AND LL 9/42 "LE Periodic Advertising", otherwise Excluded.
9/35	ISO Receive Test	[8] 7.8.112, 7.8.113, 7.8.114	C.32		C.32: Mandatory IF LL 9/31 "Connected Isochronous Stream-Central" OR LL 9/32 "Connected Isochronous Stream-Peripheral" OR LL 9/34 "Synchronized Receiver", otherwise Excluded.
9/36	ISO Transmit Test	[8] 7.8.111, 7.8.114	C.33		C.33: Mandatory IF LL 9/31 "Connected Isochronous Stream-Central" OR LL 9/32 "Connected Isochronous Stream-Peripheral" OR LL 9/33 "Isochronous Broadcaster", otherwise Excluded.
9/41	LE Extended Advertising	[6] 4.6.12	C.38		C.38: Optional IF CORE 1a/50 "Controller Core v5 .0 or later" AND (LL 9/10 "Channel Selection Algorithm #2" OR NOT (LL 1/4 "Peripheral Role" OR LL 1/5 "Central Role")), otherwise Excluded.
9/42	LE Periodic Advertising	[6] 4.6.13	C.39		C.39: Optional IF LL 9/41 "LE Extended Advertising" AND LL 9/10 "Channel Selection Algorithm #2", otherwise Excluded.
9/43	Periodic Advertising ADI support	[ 10] 4.6.34	C.40		C.40: Optional IF CORE 1a/53 "Controller Core v5 .3 or later" AND LL 9/42 "LE Periodic Advertising", otherwise Excluded.
9/46	BN values greater than 1 in CIS	[7] 4.5.13.1	C.42		C.42: Optional IF (LL 9/31 "Connected Isochronous Stream-Central" OR LL 9/32 "Connected Isochronous Stream-Peripheral"), otherwise Excluded.
9/47	FT values greater than 1 in CIS	[7] 4.5.13.1	C.42		C.42: Optional IF (LL 9/31 "Connected Isochronous Stream-Central" OR LL 9/32 "Connected Isochronous Stream-Peripheral"), otherwise Excluded.
9/60	Features with Host Controlled feature bits	[7] 4.6, 4.6.33	C.55		C.55: Mandatory IF LL 9/31 "Connected Isochronous Stream-Central" OR LL 9/32 "Connected Isochronous Stream-Peripheral" OR LL 9/45 "Connection Subrating" OR LL 9/48 "Advertising Coding Selection" OR LL 9/56 "Channel Sounding", otherwise Excluded.

Table 10: Scatternet Capabilities

Item Capability Reference Support Status Comment

Table 11: Protocol Synchronizing Features

Prerequisite: LL 1/3a "Synchronized State"

Item	Capability	Reference	Support	Status	Comment
11/1	Synchronizing to Periodic Advertising	[6] 4.4.3.4	C.3		C.3: Mandatory IF LL 4/8 "Scanning for Periodic Advertising", otherwise Excluded.

11/3 Receiving Data on Single Broadcast [7] 4.4.5.2 C.2 C.2: Mandatory IF LL 9/34 "Synchronized Receiver",
Isochronous Stream otherwise Excluded.

Table 11a: Synchronized Receiver Features

Prerequisite: LL 9/34 "Synchronized Receiver"

Item	Capability	Reference	Support	Status	Comment
11a/1	BN values greater than 1	[7] 4.4.6.3	O

11a/2 Pre-transmission [7] 4.4.6.3 O

Table 12: Protocol Isochronous Broadcasting Features

Prerequisite: LL 1/6 "Isochronous Broadcasting State"

Item	Capability	Reference	Support	Status	Comment
12/1	Encrypted Broadcast Isochronous Stream	[7] 4.4.6.1 , 4.4.6.10	C.1		C. 1: Mandatory IF LL 9/1 "LE Encryption", otherwise Excluded.
12/2	Unencrypted Broadcast Isochronous Stream	[7] 4.4.6.1	M
12/3	Transmitting Data on Multiple Broadcast Isochronous Streams	[7] 4.4.6.3	O
12/4	BN values greater than 1	[7] 4.4.6.3	O

12/5 Pre-transmission [7] 4.4.6.6 O

Table 13: Supported Capabilities

Prerequisite: LL 9/56 "Channel Sounding"
Item Capability Reference Support Status Comment
Table 14: Channel Sounding Mode Capabilities
Prerequisite: LL 9/56 "Channel Sounding"
Item Capability Reference Support Status Comment

Link Manager Protocol

Table 1: Response Messages

Item	Capability	Reference	Support	Status	Comment
1/1	Accept message	[ 1] 2.7	M
1/2	Reject message	[ 1] 2.7	M

Table 2: Supported Features

Item	Capability	Reference	Support	Status	Comment
2/1	3-slot packets	[ 1] 3.3, 4.1.10	O
2/2	5-slot packets	[ 1] 3.3, 4.1.10	O

2/3	Encryption	[ 1] 3.3, 4.2.5	M
2/4	Slot offset	[ 1] 3.3, 4.4.1	O
2/5	Timing accuracy	[ 1] 3.3, 4.3.1	O
2/6	Role switch	[ 1] 3.3, 4.4.2,[3] 8.6.5	C.5		C.5: Optional IF LMP 2/4 "Slot offset", otherwise Excluded.
2/8	Sniff mode	[ 1] 3.3, 4.5.3	O
2/10	Power Control	[ 1] 3.3, 4.1.3,[2] 3	C.1		C. 1: Mandatory IF RF 1/1 "Power Class 1", otherwise Optional.
2/11	Channel quality driven data rate	[ 1] 3.3, 4.1.7	O
2/12	SCO link	[ 1] 3.3, 4.6. 1,[3] 4.3, 6.5.2.1 , 6.5.2.4	O
2/13	RSSI with inquiry results	[ 1] 3.3,[3] 8.4.2	O
2/13a	Power Control Requests	[ 1] 3.3, 4.1.3	O
2/15	eSCO link	[ 1] 3.3, 4.6.2,[3] 5.5, 6.5.3.1	O
2/17	Enhanced Data Rate ACL (2 Mb/s mode)	[ 1] 3.3,[3] 6.5.4	O
2/17a	Enhanced Data Rate ACL (3 Mb/s mode)	[ 1] 3.3,[3] 6.5.4	C.19		C. 19: Optional IF LMP 2/17 "Enhanced Data Rate ACL (2 Mb/s mode)", otherwise Excluded.
2/18	Enhanced Data Rate eSCO (2 Mb/s mode)	[ 1] 3.3,[3] 6.5.3	O
2/18a	Enhanced Data Rate eSCO (3 Mb/s mode)	[ 1] 3.3,[3] 6.5.3	C.20		C.20: Optional IF LMP 2/18 "Enhanced Data Rate eSCO (2 Mb/s mode)", otherwise Excluded.
2/19a	Simple Pairing Updates	[4], [5] 3.3, 4.2.7.4	M
2/19b	Secure Simple Pairing (Controller Support)	[ 1] 3.3, 4.2.7	M
2/20	Enhanced Power Control	[ 1] 3.3, 4.1.3.1	C.6		C.6: Optional IF LMP 2/10 "Power Control" AND LMP 2/13a "Power Control Requests", otherwise Excluded.
2/22	LE Supported (Controller)	[ 1] 3.3	C.4		C.4: Mandatory IF CORE 10/12 "Link Layer (LL)", otherwise Excluded.
2/23	LE and BR/EDR to same device capable (Controller)	[ 1] 3.3	C.12		C. 12: Optional IF LMP 2/22 "LE Supported (Controller)", otherwise Excluded.
2/27	Ping	[ 1] 3.3, 4.1.13	O
2/30	Paging Parameter Negotiation	[ 1] 3.3, 4.1.9	O

Table 2a: Additional Features

Item Capability Reference Support Status Comment
Table 2b: EDR Features
Item Capability Reference Support Status Comment
Table 3: Authentication

Item	Capability	Reference	Support	Status	Comment
3/2	Initiate authentication after connection completed	[ 1] 4.2.1	O

3/3 Respond to authentication request [ 1] 4.2.1 M

Table 4: Pairing

Item	Capability	Reference	Support	Status	Comment
4/1	Initiate pairing before connection completed	[ 1] 4.4.2	O
4/2	Initiate pairing after connection completed	[ 1] 4.4.2	O
4/3	Respond to pairing request	[ 1] 4.2.2.1 , 4.2.2.3	M
4/4	Use fixed PIN and request responder to initiator switch	[ 1] 4.2.2.2	C.1		C. 1: Mandatory to support at least one.
4/5	Use variable PIN	[ 1] 4.2.2.2	C.1		C. 1: Mandatory to support at least one.
4/6	Accept initiator to responder switch	[ 1] 4.2.2.2	C.2		C.2: Mandatory IF LMP 4/5 "Use variable PIN" AND (LMP 4/1 "Initiate pairing before connection completed" OR LMP 4/2 "Initiate pairing after connection completed"), otherwise Optional.

4/7 TSPC_Change_of_IO_Capabilities [ 1] 4.2.7.3.4 M

Table 5: Link Keys

Item	Capability	Reference	Support	Status	Comment
5/2	Creation of link key-Combination Key	[ 1] 4.2.2.4	M
5/3	Initiate change of link key	[ 1] 4.2.3	O
5/4	Accept change of link key	[ 1] 4.2.3	M
5/8	Support for 7 bytes or longer encryption key size	[ 1] 4.2.5.2	M

Table 6: Encryption

Prerequisite: LMP 2/3 "Encryption"
Table 7: Clock Offset Information
Table 8: Slot Offset Information
Prerequisite: LMP 2/4 "Slot offset"
Table 9: Timing Accuracy Information
Prerequisite: LMP 2/5 "Timing accuracy"
Table 10: LM Version Information
Table 11: Feature Support
Table 12: Name Information

11/4 Respond to extended features request		[ 1] 4.3.4 C.2 C.2: Mandatory IF LMP 2a/128 "Connectionless Peripheral Broadcast-Central Operation"OR LMP 2a/129 "Connectionless Peripheral Broadcast-Peripheral Operation" OR LMP 2a/130 "Synchronization Train" OR LMP 2a/131 "Synchronization Scan" OR LMP 2a/132 "Inquiry Response Notification event" OR LMP 2a/133 "Generalized interlaced scan" ORLMP 2/28 "Coarse Clock Adjustment" OR LMP 2/26 "Secure Connections (Controller Support)" OR LMP 2/27 "Ping" OR LMP 2/29 "Slot Availability Mask" OR LMP 2a/139 "Train nudging", otherwise Optional. Note: Mandatory IF a feature requiring another features page (a feature with an LMP feature number greater than 63 in Table 3. 1: Mapping of LMP Feature Bits to ICS Items), other than Host features, is supported, otherwise Optional.
Item	Capability		Reference	Support	Status Comment
12/1	Request name information		[ 1] 4.3.5	M

12/2 Respond to name requests [ 1] 4.3.5 M

Table 13: Role Switch

Prerequisite: LMP 2/6 "Role switch"

Item	Capability	Reference	Support	Status	Comment
13/1	Request role switch	[ 1] 4.4.2	O

13/2 Accept role switch requests [ 1] 4.4.2 M

Table 14: Detach

14/1 Detach connection [ 1] 4.1.2 M

Table 14a: Setting up and Removing Enhanced Date Rate ACL Connection

Item	Capability	Reference	Support	Status	Comment
14a/1	Enter Enhanced Data Rate	[ 1] 4.1.11	C.1		C. 1: Mandatory IF LMP 2/17 "Enhanced Data Rate ACL (2 Mb/s mode)", otherwise Excluded.

14a/2 Exit Enhanced Data Rate
[ 1] 4.1.11 C.1 C. 1: Mandatory IF LMP 2/17 "Enhanced Data Rate ACL (2 Mb/s mode)", otherwise Excluded.
Table 14b: Setting up and Removing Enhanced Data Rate eSCO Connection

14b/1 Enter and exit eSCO using Enhanced Data Rate Packets
[ 1] 4.6.2 C.1 C. 1: Mandatory IF LMP 2/18 "Enhanced Data Rate eSCO (2
Mb/s mode)", otherwise Excluded.

Table 15: Hold Mode

Prerequisite: LMP 2/7 "Hold mode"
Item Capability Reference Support Status Comment
Table 16: Sniff Mode
Prerequisite: LMP 2/8 "Sniff mode"

16/2	Request sniff mode	[ 1] 4.5.3, 4.5.3.2	O
16/3	Respond to sniff mode requests (renegotiate or reject)	[ 1] 4.5.3.2	M
16/5	Request un-sniff	[ 1] 4.5.3.2	C.1		C. 1: Mandatory IF LMP 16/2 "Request sniff mode", otherwise Optional.
16/6	Accept un-sniff requests	[ 1] 4.5.3.2	M

16/7 Sniff Subrating Mode [ 1] 4.5.3.2 M

Table 18: Power Control

Item	Capability	Reference	Support	Status	Comment
18/1	Request to Increase Power	[ 1] 4.1.3	C.1		C. 1: Mandatory IF LMP 2/13a "Power Control Requests", otherwise Excluded.
18/2	Request to Decrease Power	[ 1] 4.1.3	C.1		C. 1: Mandatory IF LMP 2/13a "Power Control Requests", otherwise Excluded.
18/3	Respond when max power reached	[ 1] 4.1.3	C.2		C.2: Mandatory IF LMP 2/10 "Power Control", otherwise Excluded.
18/4	Respond when min power reached	[ 1] 4.1.3	C.2		C.2: Mandatory IF LMP 2/10 "Power Control", otherwise Excluded.
18/5	Request to increment power a	[ 1]	C.3		C.3: Mandatory IF LMP 2/20 "Enhanced Power Control",
	single step	4.1.3.1.1			otherwise Excluded.
18/6	Request to decrease power a single	[ 1]	C.3		C.3: Mandatory IF LMP 2/20 "Enhanced Power Control",
	step	4.1.3.1.1			otherwise Excluded.
18/7	Request to go to max power	[ 1] 4.1.3.1.1	C.3		C.3: Mandatory IF LMP 2/20 "Enhanced Power Control", otherwise Excluded.
18/8	Respond to increment power a	[ 1]	C.3		C.3: Mandatory IF LMP 2/20 "Enhanced Power Control",
	single step	4.1.3.1.2			otherwise Excluded.
18/9	Respond to decrease power a	[ 1]	C.3		C.3: Mandatory IF LMP 2/20 "Enhanced Power Control",
	single step	4.1.3.1.2			otherwise Excluded.
18/10	Respond to go to max power	[ 1] 4.1.3.1.2	C.3		C.3: Mandatory IF LMP 2/20 "Enhanced Power Control", otherwise Excluded.

Table 19: Link Supervision Timeout

Item	Capability	Reference	Support	Status	Comment
19/1	Set link supervision timeout value	[ 1] 4.1.6	O
19/2	Accept link supervision timeout setting	[ 1] 4.1.6	M

Table 20: Quality of Service

Item	Capability	Reference	Support	Status	Comment
20/1	Channel quality driven change between DM and DH packet types	[ 1] 4.1.7	C.1		C. 1: Mandatory IF LMP 2/11 "Channel quality driven data rate", otherwise Optional.

20/2	Force/Request change of Quality of Service	[ 1] 4.1.8, 4.1.8.1	M
20/3	Request change of Quality of Service	[ 1] 4.1.8, 4.1.8.2	M

Table 22: Multi-Slot Packets

Item	Capability	Reference	Support	Status	Comment
22/1	Accept maximum allowed number of slots to be used	[ 1] 4.1.10	C.1		C. 1: Mandatory IF LMP 2/1 "3-slot packets" OR LMP 2/2 "5-slot packets", otherwise Optional.
22/2	Request maximum number of slots tobe used	[ 1] 4.1.10	C.1		C. 1: Mandatory IF LMP 2/1 "3-slot packets" OR LMP 2/2 "5-slot packets", otherwise Optional.

22/3 Accept request of maximum number of [ 1] 4.1.10 C.1 C. 1: Mandatory IF LMP 2/1 "3-slot packets" OR LMP 2/2 "5-slot
slots to be used packets", otherwise Optional.

Table 23: Paging Scheme

Prerequisite: LMP 2/30 "Paging Parameter Negotiation"

Item	Capability	Reference	Support	Status	Comment
23/1	Request page mode to use	[ 1] 4.1.9, 4.1.9.1	M
23/2	Accept suggested page mode	[ 1] 4.1.9, 4.1.9.1	M
23/3	Request page scan mode to use	[ 1] 4.1.9, 4.1.9.2	M

23/4 Accept suggested page scan mode [ 1] 4.1.9, 4.1.9.2 M

Table 24: Connection Establishment

Item	Capability	Reference	Support	Status	Comment
24/1	Create connection for higher layers	[ 1] 4.1.1	M
24/2	Respond to requests to establish connections for higher layers	[ 1] 4.1.1	M

24/3 Indicate that link set-up is completed [ 1] 4.1.1 M

Table 25: Test Mode

Item	Capability	Reference	Support	Status	Comment
25/1	Activate test mode	[ 1] 4.7.1	O
25/2	Ability to reject activation of test mode if test mode is disabled	[ 1] 4.7.1	M
25/3	Control test mode	[ 1] 4.7.2	O

25/4 Ability to reject test mode control commands if test mode is disabled [ 1] 4.7.2 M

Table 26: Adaptive Frequency Hopping

Item	Capability	Reference	Support	Status	Comment
26/1	Support of AFH switch as Central	[ 1] 4.1.4	O

26/2	Support of AFH switch as Peripheral	[ 1] 4.1.4	O
26/4	Support of Channel Classification reporting as Peripheral	[ 1] 4.1.5	C.2		C.2: Optional IF LMP 26/2 "Support of AFH switch as Peripheral", otherwise Excluded.
26/4a	Support of Channel Classification reporting as Central	[ 1] 4.1.5	C.4		C.4: Optional IF LMP 26/1 "Support of AFH switch as Central", otherwise Excluded.
26/5	Support channel classification from host	[ 1] 4.1.5	C.3		C.3: Mandatory IF LMP 26/1 "Support of AFH switch as Central" ORLMP 26/4 "Support of Channel Classification reporting as Peripheral", otherwise Optional.
26/6	Support of Channel Classification	[ 1] 4.1.5	O

Table 27: Ping

Prerequisite: LMP 2/27 "Ping"

Item	Capability	Reference	Support	Status	Comment
27/1	Initiate LMP Ping	[ 1] 4.1.13	O

27/2 Respond to LMP Ping [ 1] 4.1.13 M

Table 28: Coarse Clock Adjustment

Prerequisite: LMP 2/28 "Coarse Clock Adjustment"
Item Capability Reference Support Status Comment
Table 29: Slot Availability Mask
Prerequisite: LMP 2/29 "Slot Availability Mask"
Item Capability Reference Support Status Comment
Table 30: BB Requirements
Item Capability Reference Support Status Comment

BR/EDR Radio Physical Layer

Table 1: RF Capabilities

Item	Capability	Reference	Support	Status	Comment
1/1	Power Class 1	[ 1] 3	C.5		C.5: Mandatory to support at least one.
1/4	Power Control	[ 1] 3	C.1		C. 1: Mandatory IF RF 1/1 "Power Class 1", otherwise Optional IF RF 1/2 "Power Class 2" OR RF 1/3 "Power Class 3", otherwise Excluded.
1/5	1-slot packets supported	[2] 6.5	M
1/6	3-slot packets supported	[2] 6.5	O
1/7	5-slot packets supported	[2] 6.5	O
1/8	79 Channels	[ 1] 2	M

1/9	Support for GFSK modulation	[ 1] 3.1	M
1/10	Support for π/4-DQPSK modulation	[ 1] 3.2	O
1/11	Support for 8DPSK modulation	[ 1] 3.2	C.3		C.3: Optional IF RF 1/10 "Support for π/4-DQPSK modulation", otherwise Excluded.
1/12	Enhanced Power Control	[ 1] 3	C.4		C.4: Optional IF RF 1/4 "Power Control", otherwise Excluded.

RFCOMM

Table 0: Major Versions (X.Y)

0/2 RFCOMM v1 .2 with TS 07.10
[ 1] C.1 C. 1: Mandatory to support one and only one of RFCOMM 0/1 "RFCOMM v1 .1 with TS 07. 10" OR RFCOMM 0/2 "RFCOMM v1 .2 with TS 07. 10".

Table 1: Supported Procedures

Item	Capability	Reference	Support	Status	Comment
1/1	Initialize RFCOMM Session	[ 1] 5.2.1	C.5		C.5: Mandatory to support at least one of RFCOMM 1/1 "Initialize RFCOMM Session" OR RFCOMM 1/2 "Respond to Initialization of an RFCOMM Session".
1/2	Respond to Initialization of an RFCOMM Session	[ 1] 5.2.1	C.5		C.5: Mandatory to support at least one of RFCOMM 1/1 "Initialize RFCOMM Session" OR RFCOMM 1/2 "Respond to Initialization of an RFCOMM Session".
1/3	Shutdown RFCOMM Session	[ 1] 5.2.2	M
1/4	Respond to a Shutdown of an RFCOMM Session	[ 1] 5.2.2	M
1/5	Establish DLC	[ 1] 5.2.1	C.2		C.2: Mandatory IF RFCOMM 1/1 "Initialize RFCOMM Session", otherwise Excluded.
1/6	Respond to Establishment of a DLC	[ 1] 5.2.1	C.1		C. 1: Mandatory IF RFCOMM 1/2 "Respond to Initialization of an RFCOMM Session", otherwise Excluded.
1/7	Disconnect DLC	[ 1] 5.2	M
1/8	Respond to Disconnection of a DLC	[ 1] 5.2	M
1/9	Respond to and send MSC Command	[ 1] 2.2	M
1/10	Initiate Transfer Information	[ 1] 5.1	M
1/11	Respond to Test Command	[ 1] 4.3	M
1/12	Send Test Command	[ 1] 4.3	O
1/13	React to Aggregate Flow Control	[ 1] 6.3	M
1/14	Respond to RLS Command	[ 1] 5.5.2	M
1/15	Send RLS Command	[ 1] 5.5.2	O

1/16	Respond to PN Command	[ 1] 5.5.3	M
1/17	Send PN Command	[ 1] 5.5.3	C.3		C.3: Mandatory IF RFCOMM 1/1 "Initialize RFCOMM Session", otherwise Optional.
1/18	Send Non-Supported Command (NSC) response	[ 1] 4.3	C.4		C.4: Mandatory IF RFCOMM 0/2 "RFCOMM v1 .2 with TS 07. 10", otherwise Optional.
1/19	Respond to RPN Command	[ 1] 5.5.1	M
1/20	Send RPN Command	[ 1] 5.5.1	O
1/21	Closing Multiplexer by First Sending a DISC Command	[ 1] 5.2.2	O

1/22 Support of Credit Based Flow [ 1] 6.5 M
Control

LE Radio Physical Layer

Table 1: Bluetooth LE RF Capabilities

Item	Capability	Reference	Support	Status	Comment
1/1	LE Transmitter	[ 1] 3	C.1		C. 1: Mandatory to support at least one. Note: Selecting both RFPHY 1/1 "LE Transmitter" and RFPHY 1/2 "LE Receiver" is equivalent to selecting RFPHY 1/3 "LE Transceiver" and vice versa.
1/2	LE Receiver	[ 1] 4	C.1		C. 1: Mandatory to support at least one. Note: Selecting both RFPHY 1/1 "LE Transmitter" and RFPHY 1/2 "LE Receiver" is equivalent to selecting RFPHY 1/3 "LE Transceiver" and vice versa.
1/3	LE Transceiver	[ 1] 3, 4	C.1		C. 1: Mandatory to support at least one. Note: Selecting both RFPHY 1/1 "LE Transmitter" and RFPHY 1/2 "LE Receiver" is equivalent to selecting RFPHY 1/3 "LE Transceiver" and vice versa.
1/4	LE 2M PHY	[2] 3, 4	C.2		C.2: Optional IF CORE 1a/50 "Controller Core v5 .0 or later", otherwise Excluded.
1/5	Stable Modulation IndexTransmitter	[2] 3.1.1	C.3		C.3: Optional IF CORE 1a/50 "Controller Core v5 .0 or later" AND (RFPHY 1/1 "LE Transmitter" OR RFPHY 1/3 "LE Transceiver"), otherwise Excluded.
1/6	Stable Modulation IndexReceiver	[2] 3.1.1	C.4		C.4: Optional IF CORE 1a/50 "Controller Core v5 .0 or later" AND (RFPHY 1/2 "LE Receiver" OR RFPHY 1/3 "LE Transceiver"), otherwise Excluded.
1/7	LE Coded PHY	[2] 3, 4	C.2		C.2: Optional IF CORE 1a/50 "Controller Core v5 .0 or later", otherwise Excluded.
1/8	Transmitting Constant Tone Extensions	[3] 5	C.10		C. 10: Optional IF CORE 1a/51 "Controller Core v5 .1 or later" AND (RFPHY 1/1 "LE Transmitter" OR RFPHY 1/3 "LE Transceiver"), otherwise Excluded.
1/9	2 µs Antenna Switching During Constant Tone Extension Transmission (AoD)	[3] 5	C.5		C.5: Optional IF RFPHY 1/8 "Transmitting Constant Tone Extensions", otherwise Excluded.
1/10	1 µs Antenna Switching During Constant Tone Extension Transmission (AoD)	[3] 5	C.6		C.6: Optional IF RFPHY 1/9 "2 µs Antenna Switching During Constant Tone Extension Transmission (AoD)", otherwise Excluded.
1/11	2 µs Antenna Sampling During Constant Tone Extension Reception (AoD)	[3] 5	C.11		C. 11: Optional IF CORE 1a/51 "Controller Core v5 .1 or later" AND (RFPHY 1/2 "LE Receiver" OR RFPHY 1/3 "LE Transceiver"), otherwise Excluded.

1/12	2 µs Antenna Switching and Sampling During Constant Tone Extension Reception (AoA)	[3] 5	C.7		C.7: Optional IF RFPHY 1/11 "2 µs Antenna Sampling During Constant Tone Extension Reception (AoD)", otherwise Excluded.
1/13	1 µs Antenna Sampling During Constant Tone Extension Reception (AoD)	[3] 5	C.7		C.7: Optional IF RFPHY 1/11 "2 µs Antenna Sampling During Constant Tone Extension Reception (AoD)", otherwise Excluded.
1/14	1 µs Antenna Switching and Sampling During Constant Tone Extension Reception (AoA)	[3] 5	C.8		C.8: Mandatory IF RFPHY 1/12 "2 µs Antenna Switching and Sampling During Constant Tone Extension Reception (AoA)" AND RFPHY 1/13 "1 µs Antenna Sampling During Constant Tone Extension Reception (AoD)", otherwise Excluded.

Table 3: Channel Sounding Capabilities

Prerequisite: ((RFPHY 1/1 "LE Transmitter"AND RFPHY 1/2 "LE Receiver") OR RFPHY 1/3 "LE Transceiver") AND RFPHY 1/16 "Channel Sounding"
Item Capability Reference Support Status Comment

Service Discovery Protocol

Table 1b: Role Requirements

Item	Capability	Reference	Support	Status	Comment
1b/1	Server	[ 1] 2.1	C.1		C. 1: Mandatory to support at least one.
1b/2	Client	[ 1] 2.1	C.1		C. 1: Mandatory to support at least one.

Table 2: Service Search Response

Prerequisite: SDP 1b/1 "Server"

Item	Capability	Reference	Support	Status	Comment
2/1	Service Search Response	[ 1] 4.5.2	M

Table 4: Service Attribute Response

Prerequisite: SDP 1b/1 "Server"

Item	Capability	Reference	Support	Status	Comment
4/1	Service Attribute Response	[ 1] 4.6.2	M
4/2	Generates continuation state in Service Attribute Response	[ 1] 4.3, 4.6.2	O
4/3	Service Attribute Response with AdditionalProtocolDescriptorList attribute	[ 1] 4.5.2, 5.1.6	O

Table 6: Service Search Attribute Response

Prerequisite: SDP 1b/1 "Server"

Item	Capability	Reference	Support	Status	Comment
6/1	Service Search Attribute Response	[ 1] 4.7.2	M
6/2	Generates continuation state in Service Search Attribute Response	[ 1] 4.3, 4.7.2	O
6/3	Service Search Attribute Response with AdditionalProtocolDescriptorList attribute	[ 1] 4.7.2, 5.1.6	O

Table 7: Invalid Service Search Attribute Request

Prerequisite: SDP 1b/1 "Server"
Table 8: Service Browsing
Prerequisite: SDP 1b/1 "Server"

Item	Capability	Reference	Support	Status Comment
7/1	Error response to Service Search Attribute Request	[ 1] 4.4	M
Item	Capability Reference	Support	Status	Comment

Table 9: Attributes Present in IUT

Prerequisite: SDP 1b/1 "Server"

Item	Capability	Reference	Support	Status	Comment
9/2	ProtocolDescriptorList	[ 1] 5.1.5	O
9/9	ServiceName	[ 1] 5.1.15	O
9/14	BluetoothProfileDescriptorList	[ 1] 5.1.11	O
9/18	ServiceRecordHandle	[ 1] 5.1.1	M
9/19	ServiceClassIDList	[ 1] 5.1.2	M

Table 10: Service Attribute Request

Prerequisite: SDP 1b/2 "Client"
Item Capability Reference Support Status Comment
Table 11: Service Search Attribute Request
Prerequisite: SDP 1b/2 "Client"
Item Capability Reference Support Status Comment

BR/EDR Security

Table 1: Security Mechanisms

Item	Capability	Reference		Support	Status	Comment
1/1	Legacy Security	[ 1]	1	M
1/2	Secure Simple Pairing	[ 1]	1	M

Table 2: Security Algorithms

Item	Capability	Reference		Support	Status	Comment
2/1	E0 encryption	[ 1]	1	C.1		C. 1: Mandatory IF SEC 1/1 "Legacy Security" OR SEC 1/2 "Secure Simple Pairing", otherwise Excluded.
2/3	Legacy authentication	[ 1]	1	C.1		C. 1: Mandatory IF SEC 1/1 "Legacy Security" OR SEC 1/2 "Secure Simple Pairing", otherwise Excluded.
2/3a	Secure Simple Pairing Authentication	[ 1]	1	C.5		C.5: Mandatory IF SEC 1/2 "Secure Simple Pairing" OR SEC 1/3 "Secure Connections", otherwise Excluded.
2/5	E3 key generation	[ 1]	1	C.3		C.3: Mandatory IF SEC 1/1 "Legacy Security", otherwise Excluded.
2/6	AES key generation h3	[ 1]	1	C.5		C.5: Mandatory IF SEC 1/2 "Secure Simple Pairing" OR SEC 1/3 "Secure Connections", otherwise Excluded.

2/7 P-192 elliptic curve [ 1] 1 C.4 C.4: Mandatory IF SEC 1/2 "Secure Simple Pairing", otherwise Excluded.

Table 3: Broadcast Encryption Options

Item	Capability	Reference	Support	Status	Comment
3/1	No encryption	[ 1] 4.2	M

3/2 Point-to-point only encryption [ 1] 4.2 M
Table 4: LMP Requirements

Item	Capability	Reference	Support	Status	Comment
4/1	Encryption	[ 1] 1	M

4/2 Secure Simple Pairing (Controller [ 1] 1 C.1 C. 1: Mandatory IF SEC 1/2 "Secure Simple Pairing", otherwise
Support) not defined.

Security Manager

Table 1: Role Requirements

Item	Capability	Reference	Support	Status	Comment
1/1	Central Role (Initiator)	[ 1] 2.4	C.1		C. 1: Mandatory to support at least one.

1/2 Peripheral Role (Responder) [ 1] 2.4 C.1 C. 1: Mandatory to support at least one.

Table 2: Security Properties

Item	Capability	Reference	Support	Status	Comment
2/1	Authenticated MITM protection	[ 1] 2.3.1	O
2/2	Unauthenticated no MITM protection	[ 1] 2.3.1	C.1		C. 1: Mandatory IF SM 2/1 "Authenticated MITM protection", otherwise Optional.
2/3	No security requirements	[ 1] 2.3.1	M

2/5 LE Secure Connections [ 1] 2.3.1 O

Table 3: Encryption Key Size

Prerequisite: SM 2/1 "Authenticated MITM protection" OR SM 2/2 "Unauthenticated no MITM protection" OR SM 4/3 "Out of Band"
Item Capability Reference Support Status Comment
3/1 Encryption Key Size [ 1] 2.3.4 M

Table 4: Pairing Method

Item	Capability	Reference	Support	Status	Comment
4/1	Just Works	[ 1] 2.3.5	O

4/2 Passkey [ 1] 2.3.5 C.1 C. 1: Mandatory to support at least one IF SM 2/1 "Authenticated MITM protection", Entry otherwise Excluded.

Table 5: Security Initiation

5/1	Encryption Setup using STK	[ 1] 2.4	C.3		C.3: Mandatory IF SM 2/1 "Authenticated MITM protection" OR SM 2/2 "Unauthenticated no MITM protection" OR SM 4/3 "Out of Band", otherwise Excluded.
5/2	Encryption Setup using LTK	[ 1] 2.4	O
5/3	Peripheral Initiated Security	[ 1] 2.4.6	C.1		C. 1: Optional IF SM 1/2 "Peripheral Role (Responder)", otherwise Excluded.
5/4	Peripheral Initiated Security-Central response	[ 1] 2.4.6	C.2		C.2: Mandatory IF SM 1/1 "Central Role (Initiator)", otherwise Excluded.
5/5	CT2 bit	[2] 2.4.2.4 , 3.5.2	C.4		C.4: Excluded IF NOT SM 8a/1 "Cross Transport Key Derivation Supported"AND NOT SM 8b/1 "Cross Transport Key Derivation Supported", otherwise Mandatory IF CORE 2a/50 "Host Core v5 .0 or later", otherwise Optional.

Table 6: Signing Algorithm

Item	Capability	Reference	Support	Status	Comment
6/1	Signing Algorithm-Generation	[ 1] 2.4	O

6/2 Signing Algorithm-Resolving [ 1] 2.4 O

Table 7a: Key Distribution by Central

Prerequisite: SM 1/1 "Central Role (Initiator)"

Item	Capability	Reference	Support	Status	Comment
7a/1	Encryption Key	[ 1] 2.4.3	O
7a/2	Identity Key	[ 1] 2.4.3	O
7a/3	Signing Key	[ 1] 2.4.3	O

Table 7b: Key Distribution by Peripheral

Prerequisite: SM 1/2 "Peripheral Role (Responder)"

Item	Capability	Reference	Support	Status	Comment
7b/1	Encryption Key	[ 1] 2.4.3	O
7b/2	Identity Key	[ 1] 2.4.3	O
7b/3	Signing Key	[ 1] 2.4.3	O

Table 8a: Cross-Transport Key Derivation by Central

Prerequisite: SM 1/1 "Central Role (Initiator)"

Item	Capability	Reference	Support	Status	Comment
8a/1	Cross Transport Key Derivation Supported	[ 1] 2.3.5.7	C.1		C. 1: Optional IF SM 2/5 "LE Secure Connections", otherwise Excluded.

8a/3 Derivation of BR/EDR Link Key from LE LTK
[ 1] 2.4.2.4 C.2 C.2: Mandatory to support at least one IF SM 8a/1 "Cross Transport Key
Derivation Supported", otherwise Excluded.

Table 8b: Cross-Transport Key Derivation by Peripheral

Prerequisite: SM 1/2 "Peripheral Role (Responder)"

8b/1	Cross Transport Key Derivation Supported	[ 1] 2.3.5.7	C.1		C. 1: Optional IF SM 2/5 "LE Secure Connections", otherwise Excluded.
8b/3 Derivation of BR/EDR Link Key from LE LTK		[ 1] 2.4.2.4	C.2	C.2: Mandatory to support at least one IF SM 8b/1 "Cross Transport Key Derivation Supported", otherwise Excluded.

Serial Port Profile

Table 0: Major Versions (X.Y)

0/2 SPP v1 .2 SPP v1 .2 C.1 C. 1: Mandatory to support one and only one major version.

Table 1: Role Requirements

Item	Capability	Reference	Support	Status	Comment
1/1	Device A (DevA)	[ 1] 2.2	C.1		C. 1: Mandatory to support at least one of SPP 1/1 "Device A (DevA)" OR SPP 1/2 "Device B (DevB)".

1/2 Device B [ 1] 2.2 C.1 C. 1: Mandatory to support at least one of SPP 1/1 "Device A (DevA)" OR SPP 1/2
(DevB) "Device B (DevB)".

Table 2: Serial Port Service Support

Item	Capability	Reference		Support	Status	Comment
2/1	Support of SPP asa standalone profile	[ 1]	1.2	O
2/1a	SPP as a standalone profileDevice A (DevA)	[ 1]	1.2	C.2, C.3		C.2: Mandatory to support at least one of SPP 2/1a "SPP as a standalone profileDevice A (DevA)" OR SPP 2/1b "SPP as a standalone profile-Device B (DevB)" IF SPP 2/1 "Support of SPP as a standalone profile" is supported, otherwise Excluded. C.3: Optional IF SPP 1/1 "Device A (DevA)" is supported, otherwise Excluded.

2/1b SPP as a standalone profile-
[ 1] 1.2 C.2, C.4
Device B (DevB)
C.2: Mandatory to support at least one of SPP 2/1a "SPP as a standalone profileDevice A (DevA)" OR SPP 2/1b "SPP as a standalone profile-Device B (DevB)" IF SPP 2/1 "Support of SPP as a standalone profile" is supported, otherwise Excluded. C.4: Optional IF SPP 1/2 "Device B (DevB)" is supported, otherwise Excluded.

Table 3: Application Procedures

Item	Capability	Reference	Support	Status	Comment
3/1	Establish link and set up virtual serial connection	[ 1] 3.1	C.1		C. 1: Mandatory IF SPP 1/1 "Device A (DevA)" is supported, otherwise Optional.
3/2	Accept link and virtual serial connection establishment	[ 1] 3.1	C.2		C.2: Mandatory IF SPP 1/2 "Device B (DevB)" is supported, otherwise Optional.
3/3	Register Service record for application in local SDP database	[ 1] 3.1	C.3		C.3: Mandatory IF SPP 2/1b "SPP as a standalone profileDevice B (DevB)" is supported, otherwise Optional.

Table 4: SDP Dependencies

Prerequisite: SPP 2/1b "SPP as a standalone profile-Device B (DevB)"

Item	Capability	Reference	Support	Status	Comment
4/1	ServiceClassIDList	[ 1] 6.1	M

4/2	ProtocolDescriptorList	[ 1] 6.1	M

4/6 BluetoothProfileDescriptorList [ 1] 6.1 M