蓝牙参数整理20210811

📎 原始文档：https://www.kdocs.cn/l/ceYBaZ2ZyAyc

杰理蓝牙参数
Operation Frequency Range2402-2480MHZ
Bluetooth Version5.3 +BR+EDR+BLE
（低功耗蓝牙）BLE Channel40
BLE Channel Separated2 MHz
Modulated TypeGFSK、 π/4-DQPSK
（经典蓝牙）Bred r channel1 MHz
（经典蓝牙）Bred r Channel79
Data Rata1 M、2 M、3 M（目前AC700N支持3M，其它系列不支持）
支持BR (GFSK)Peak Power(dBm) (with Tolerance)
6.0，不同芯片发射功率不一样		Avg. Power(dBm) (with Tolerance)
4.0
BR (GFSK) + EDR
(GFSK + π/4DQPSK)
EDR (GFSK + π/4DQPSK）
支持 BLE(1M)
支持 BLE(2M)
支持Dual mode BLE + ( BR and EDR)
Antenna Information客户自选天线
Transmitter Details
Frequency range2402-2480MHZ
No. of hopping frequency79
Hopping channel separation, 2402 ~ 2403、2441 ~ 2442、>25KHz
2A4d7j9act8hannel separation ( In
case of multi-channel		25dB
Frequency stabiility t)20ppm
Spurious/ Harmonic radiations≤-30dbm
Max. Frequency Deviation500KHz@ BLE GFSK 2 M、250KHz@ BLE GFSK 1 M、 165@GFSK 1 M
Bandwidth of emission2 M @ BLE GFSK 2 M、 1 M @ohters
Base band frequency (In case of multi channel equipment)2402-2480MHz
Type of modulation to be requiredGFSK
Receivers Details
Frequency range2402-2480MHZ
Sensitivity-91dBm@GFSK 1 M、 -93@dBm@π/4-DQPSK DPSK
Frequency stability20ppm
Threshold input level0dBm
Intermediate frequency3 M
支持解码格式sbc\aac
延时250ms左右
声道分离度共vcomo： -50dB，共gnd： -100dB
Mic采样率cvsd： 8k， msbc： 16k
占用宽带≤ 3 MHz
发射功率8db
core Specification Version5.3 dual mode
new features for bluetoothLE 2 M PHY(2x Speed高速传输）、 LE Coded PHY(4x RANG)
Porduct TypeEnd Product
Supported Protocols/底层
PartProtocol
Core ControllerRF/ BB / LMP/
LE ControllerRF-PHY / LL
Core HostL2CAP/ SDP/ GAP/ GATT/ SM
Support Traditon Profile
ProfileVersionRole
A2 DP1.3.2SINK
AVRCP1.6.2CT
AVDTP1.3Sink
AVCTP1.4Controller(CT)
HFP1.8HF
HID1.1.1
RFCOMM1.1
SPP1.2
SDP5.3
L2CAP5.3
PNP1.3
RF经典蓝牙 IXIT for RF
IXIT ReferenceDescriptionCommentValueUnit ( if
RF:P1Timer for TX power controlTRM/CA/03
Power Control		40li ms
RF:P2In band Image frequencyRCV/CA/03 C/I
Performance		-3MHzMHz
RCV/CA/09 EDR
C/I Performance
RF:P3Value n for Intermodulation testRCV/CA/05 Intermodulation Performance4Integer
RF:P6Type of power sourceChapter 6.4, RF
Test Specification		4.2
RF:P7Nominal power source voltageChapter 6.4, RF
Test Specification		4.2V
RF:P8Operating temperature rangeChapter 6.5, RF
Test Specification		37°C
RF:P9Extreme power source voltageChapter 6.5, RF
Test Specification		4.2V
RF:P10Antenna gainChapter 6.9, RF
Test Specification		0dB
RF-PHY低功耗蓝牙ICS for RF-PHY
ItemBluetooth LE RF CapabilityStatusSupport d
1LE Transmitter ( Non-connectable, Broadcaster)C.1e
√ Yes		口No
Note： No
No
2LE Receiver ( Non-connectable, Observer)C.1√ Yes
3LE Transceiver (Connectable, Peripheral/Central)C.1√ Yes
4LE 2 M PHYC.2√ YesNo
No Note：
口No No
5Stable Modulation IndexT ittC.3√ Yes
6ransm er
Stable Modulation Index-Receiver		C.4√ Yes
7LE Coded PHYC.2√ Yes
ItemBluetooth LE RF CapabilityStatusSupported
1HCI Test InterfaceC.1口Yes口No
2UART Test InterfaceC.1口Yes口No
C.1: Mandatory to support at least one of these capabilities.
RF-PHY低功耗蓝牙IXIT for RF
IXIT ReferenceIdentifierSub-Identifier (Optional)ValueUnits
( if applicable )
RF-PHY:P1: 1In band Image frequencyLow frequency-3MHz
RF-PHY:P1:2Middle frequency-3MHz
RF-PHY:P1:3High frequency-3MHz
RF-PHY:P2: 1Value n for Intermodulation testLow frequency4Integer
RF-PHY:P2:2Middle frequency4Integer
RF-PHY:P2:3High frequency4Integer
RF-PHY:P4Type of power sourceNominal ( NOC)4.2vV
RF-PHY:P5Operating temperatureNominal ( NOC)25°C
RF-PHY:P6: 1Air humidity range ( relative)Maximum80%
RF-PHY:P6:2Minimum70%
RF-PHY:P6:3Air humidity level
for NOC/ EOC		70%
RF-PHY:P7: 1Test interface implementationHCI r -wire0
RF-PHY:P7:2Datarate115200bps
RF-PHY-PHY:P8Antenna gain0d Bi
RF-PHY:P9: 1Maximum TX packet255Bytes
RF-PHY:P9:2Maximum RX packet length255Bytes
RF-PHY:P9:3Maximum TX packet length255Bytes
RF-PHY:P9:4Maximum TX packet length255Bytes
RF-PHY:P9: 5Maximum TX packet length255Bytes
RF-PHY:P9:6Maximum RX packet length255Bytes
RF-PHY:P9:7Maximum RX packet length255Bytes
RF-PHY:P9:8Maximum RX packet length255Bytes
RF-PHY:P10: 1Maximum TX mode output power6dBm
RF-PHY:P11: 1In band Image Frequency (2Ms/s)Low frequency-3MHz
RF-PHY:P11:2Middle frequency-3MHz
RF-PHY:P11:3High frequency-3MHz
RF-PHY:P12: 1Value n for Intermodulation test
(2Ms/s)		Low frequency4Integer
RF-PHY:P12:2Middle frequency4Integer
RF-PHY:P12:3High frequency4Integer
RF-PHY:P13: 1In band Image Frequency (Stable
Modulation Receiver)		Low frequency-3MHz
RF-PHY:P13:2Middle frequency-3MHz
RF-PHY:P13:3High frequency-3MHz
RF-PHY:P14: 1Value n for Intermodulation test
(Stable Modulation Receiver)		Low frequency4Integer
RF-PHY:P14:2Middle frequency4Integer
RF-PHY:P14:3High frequency4Integer
RF-PHY:P15: 1In band Image Frequency (Stable
Modulation Receiver, 2 Ms/s)		Low frequency-3MHz
RF-PHY:P15:2Middle frequency-3MHz
RF-PHY:P15:3High frequency-3MHz
RF-PHY:P16: 1Value n for Intermodulation test
(Stable Modulation Receiver, 2 Ms/s)		Low frequency4Integer
RF-PHY:P16:2Middle frequency4Integer
RF-PHY:P16:3High frequency4Integer
音频解码格式A2 DP SBC AAC
A2 DP： SBC AAC
HFP:CVSD MSBC