701N_WATCH_乘车码调试说明文档_v2.0

📎 原始文档：https://www.kdocs.cn/l/ceGgCjmPt4QN 701N_WATCH_乘车码调试说明_v1.2
珠海市杰理科技股份有限公司Zhuhai Jieli Technology Co.,LTD
版权所有，未经许可，禁止外传
修改记录

目录
珠海市杰理科技股份有限公司……………………………………………………1
一、乘车码移植环境要求………………………………………………………4
1.移植环境要求……………………………………………………………………………………4
2. SDK版本…………………………………………………………………………………4
二、如何同步乘车码……………………………………………………………5

1. 手表端……………………………………………………………………………………………5
2. 手机端配置…………………………………………………………………………………5
   3.乘车码信息……………………………………………………………………………………5
   三、乘车码调试流程……………………………………………………………6
3. 先调通支付宝部分，参考支付宝对应文档…………………………………………………7
4. 网络调试………………………………………………………………………………………………7
5. 同步调试………………………………………………………………………………………7
   4.重点使用接口……………………………………………………………………………………8
6. ui交互接口………………………………………………………………………………………9
7. 网络有关接口…………………………………………………………………………10
8. 常见问题汇总(重要…………………………………………………………………………10
   四、附件：乘车码支付宝主要移植文件……………………………………12
   

一、乘车码移植环境要求

1.移植环境要求

(1)JL701杰理平台

ROM和RAM占用情况统计如下：

注：以上flash和ram占用情况为杰理测试数据(建议内置flash大于4M),外置flash存放乘车码信息预留1M。乘车码移植后占用约60K,同步过程消耗的ram约100KB,分辨率要求不小于360*360,请确认测试无误后再做移植。

(2)阿里平头哥加密芯片

乘车码需要手表外挂加密芯片，手表需要重新layout。同时向阿里申请时需要标明乘车码功能的加密芯片。
须知：乘车码是基于平头哥SE2.0以上(固件版本),在支付宝基础上延伸的功能。

2.SDK版本

乘车码需要基于sdk 2.1.1版本及以上才能够移植。

二、如何同步乘车码

1.手表端

首先乘车码是基于平头哥SE2.0芯片，手表支持乘车码是基于支付宝功能的。用户绑定支付宝后，获取乘车码需要连手机蓝牙网络来和阿里服务器通信。

2.手机端配置

在手表和手机蓝牙连接前需打开蓝牙网络共享。

3.乘车码信息

点击乘车码后执行对应逻辑，会联网获取所绑定支付宝乘车信息。
乘车码根据支付宝APP中用户的->出行->管理->交通卡管理，所有的交通卡进行同步。
如图支付宝app中的乘车码会同步到手表中。同时只有对应城市的乘车码被下载后才能离线使用，如只获取了城市列表就断开网络乘车码无法离线使用。
注意：下载同步时间较长，可根据交互信息客户自定义ui动画。

三、乘车码调试流程

移植补丁参考附件：乘车码支付宝主要移植文件部分，该补丁包包括了支付宝功能。
1.先调通支付宝部分，参考支付宝对应文档
2.网络调试
显示Default network interface:BT这里蓝牙网络已经连接成功。或者直接搜ip4
[03:12:31.498]Default network interface:BT
[03:12:31.498]ip4 address:192.168.44.36
[03:12:31.499]gw address:192.168.44.1
[03:12:31.500]net mask :255.255.255.0
如果没有打印上面需要排查对应宏是否打开USER_SUPPORT_PROFILE_PAN和LWIP_USE_BT(在cbp已定义)

3.同步调试

支 付 宝 绑 定 完 成，连 接蓝 牙 网 络， 调 用local_transitcode_get_default_card_info。会出现如下打印
Line 758:[00:11:43.887]transitcode_task msg :1
Line 941:[00:11:44.079]transitcode_task msg :3
Line 968:[00:11:44.242]ransitcode task msg :4
Line 31923:[00:13:51.663]transitcode_task msg :2
Line 31958:[00:13:51.913]transitcode_task msg :5
可以看到获取默认卡片没有时候，会调用本地，本地没有存放会调用网络上的卡片列表。
[00:11:44.018]alipay_storage_read len_content:46
[00:11:44.018][ALIPAY][INF0]alipay_iothub_device_name_init[140]:"device name has existed,ignore init"
[00:11:44.019][ALIPAY][INF0]alipay_iothub_device_name_init[142]:"######TIME_TAKS:117 ms"
[00:11:44.020]alipay_open 8D1F1C83E64660D659923F4776703308
[00:11:44.022]storage/virfat_flash/C/9d7b⁰6f6.rsv
[00:11:44.023]file read find in
[00:11:44.023]rets 601209a ,alipay_read_rsvd_part 40ebd40136
[00:11:44.024]alipay_close_rsvd_part
[00:11:44.075][ALIPAY][INF0]transit_default_card_info_read[278]:"######TIME_TAKS:55ms"
[00:11:44.076][ALIPAY][INF0]alipay_transit_get_default_card_info[165]:"get_default_card_info success:-[00:11:44.078][ALIPAY][INF0]alipay_transit_get_default_card_info[166]:"######TIME_TAKS:58 ms"
中间有网络层和阿里js库的交互，文件读写也在进行。
0:T⁵Y⁰8.95Zjnew_rOW 4,rew_co¹1[00:13:08.952]-dynamic init 4355360338[00:13:08.953]min_show_col_index 0,max_show_col_index O,min_show_row_index 0,max_show_row_index 2339[00:13:08.954]max_row_index 3,max_col_index 0,min_row_index 0,min_col_index 0.4[00:13:08.987]cardNo 90012088412257513516341[00:13:08.988]cardType M⁰33100042[00:13:08.988]cardtitle343[00:13:08.989]cardNo AL5543171b⁰e4647bb344[00:13:08.989]cardType T0441900345[00:13:08.989]cardtitle
最后看到cardNo和cardType连读打印出，代表获取网络的卡片列表成功。
emo_cfg.h M·C transit taskc appscommonipayupay LheadyLtransitcode 4.M×C transit task.c chengce_potch sdk271L09781.C transt taske>transit code data callbackfint,int int alipay tansit CardBasTRANSITCODE_LOCAL_GET CARD_LIST:>LWP_USEBT无结果TRANSITCODE LOCALGET_CARD_LIST \n");card_list需要拷贝使用rdBasenum =card_num;(CardBasebuf)ardBasebuf=realloc(CardBasebuf,len_card_list);=zalloc(len_card_list);sebuf,card_list,len_card_list);//0直接显示二维码//1显示卡片列表//2显示进度
ui_show_transitcodes_list(1);for(int i=0;i<card_num;i++){​printf("cardNo %s\n",CardBasebuf[i].cardMo);printf("cardType %s\n",CardBasebuf[i].cardType);printf("cardtitle %s\n",CardBasebuf[i].title);
OLON

4.重点使用接口

非使用杰理文件系统方案的：
transit_other_adapation.c(需要额外适配)
客户重点接口：
//获取本地默认城市int local_transitcode_get_default_card_info()
//获取本地城市卡片int local_transitcode_cardlist_get()
//获取网上城市卡片int net_transitcode_cardlist_get()
//kill乘车码线程void transitcode_kill()
//获取二维码local_transitcode_get_qr_data
//消息回调int transit_code_data_callback(客户重点)

5.ui交互接口

客户可以自行适配自己ui
//0直接显示二维码
//1显示卡片列表
//2显示进度
//3显示选择界面
//4城市卡片获取失败
/15二维码卡片获取失败
//6乘车码未开通
int ui_show_transitcodes_list(u8 event)
//设置ui页面释放时候不释放线程void set_cardcode_no_release()//获取当前ui释放是否需要释放线程u8 cardcode_is_need_release()//清不释放线程变量void clear_cardcode_no_release()//获取用于ui显示的城市数量int alipay_tansit_num_get()
//获取用于ui显示的城市名称char *alipay_transit_name_get_by_index(intindex)
//获取当前获取了二维码的城市索引alipay transit get default card index//获取当前获取二维码的城市名称
alipay_transit_get_global_default_card_name

6.网络有关接口

与sniff有关接口//乘车码活跃时候不进sniffu8 transitcode_task_idle_query(void)
1/获取dhcp是否成功int net_get_dhcp_flag();//需要开启USER_SUPPORT_PROFILE_PAN

7.常见问题汇总(重要)

(1)方案商需向阿里申请公司名称和产品型号，申请文档参考《支付宝智能穿戴-送测说明》

#define TCFG_PAY_ALIOS_PRODUCT_MODEL"xxx_1"#define TCFG_PAY_ALIOS_COMPANY_NAME"JL_701"//需要客户申请

(2)加密芯片在绑定支付宝后会记录机器MAC,不能更换。

加密IC在首次绑定支付宝后，会记录产品型号，MAC,因此用户调试用的加密IC不能在机器上拆开交叉验证，否则会出现同步乘车码失败。
[0]526:Destroy 42ca50.
[00:01:25.398]
[00:01:25.399][0]527:<-=IOT_OBJ_destroy(obj=4377168)
[00:01:25.399][ALIPAY][INFO]alipay_send_rpc[381]:"#≠#共共#TIME_TAKS:1179 ms"
[00:01:25.400][ALIPAY][INEO]alipay_send_rpc_simple[774]:"-------send_success ---------"
[00:01:25.401][ALIPAY][INFO]alipay_send_rpc_simple[788]:ype_wait_response"######TIMB_TAR3:0ms"
[00:01:25.403][ALIPAY][ERRO]alipay_send_rpc_simple[801]:"RPC network error!error code=7002."
[00:01:25.404][ALIPAY][DBUG]alipay_send_rpc_simple[806]:"-------ret 1"
[00:01:25.404][ALIPAY][INEO]alipay_send_rpc_simple[807]:"手FFFFFTIME_TAKS:1214ms"
[00:01:25.406][ALIPAY][ERRO]
alipay_transit_get_card_list[246]:"alipay_send_rpc_simple error!ret=1."
[00:01:25.408][ALIPAY][INFO]
alipay_transit_get_card_list[248]:"######TIME_TAKS:1254 ms"
[00:01:25.409]alipay_transit_get_card_list ret 7,card_num 0,onlineFlag 1,len 4800
[00:01:25.410]RV_NETWORK_ERROR
[00:01:25.411]TRANSITCODE_LOCAL_GET_CARD_LIST
[00:01:25.411]***card_num:0
客户在初期调试需申请对应厂商、设备型号。

(3)支付宝绑定失败

a.手表端没有对时，在绑定前应该先连接app自动对时。
b.支付宝使用profile与当前使用通道(抖音或者自定义服务)冲突。
c.卡在某个数据交换环节，log排查。

(4)主控与安全芯片通道IIC通信异常

查看是否ⅡC端口复用情况，驱动中映射的iic通道是否正确，用逻辑分析仪抓取波形排查，是否有ACK。Delay延时过小，公板测试使用120的延迟满足通信。
TCFG_PAY_ALIOS_ENABLE &&(TCFG_PAY_ALIOS_WAY_SEL==TCFG_PAY_ALIOS_WAY_T_HEAD)1 data
.scl =IO_PORTG_02,.sda =IO_PORTG_00,.delay =120|,.io_pu =1,#endif

四、附件：乘车码支付宝主要移植文件

1.AC701N.cbp文件

左侧为补丁文件，右侧为211 sdk文件。

(1)

会话*固★童肠Z+辛的9中旧目船

(2)

(3)

<Add directory="cpu/br28/ui driver/1vgl"1>
<Add directory="cpu/br28/ui driver/1vg11>
(4)软解部分代码库不能和硬解库同时编译，建议客户先移初软解部分或者用宏控制好。
(5)对应库文件
<Add option="cpu/br28/1iba/1ib_pitch_speed a"/><Add option="cpu/br28/1iba/quickjs.a"/Add optiona"cpu/br28/1iba/alpay_iot_vendor.a"/><Add option="cpu/br28/1iba/1ibFFT_pi32v2_0nChip.a"/><Add option="cpu/br28/1iba/wtg_dec_11b.a1<Add option="cpu/br28/1ba/bfiiterfun_15b.a"/>
tion="cpu/br28/1iba/1ib_pitch_speed.a"7
tion=”cpu/br28/1iba/1ibFFT_pi32v2_0nChip,a"/>tion="cpu/br28/1iba/tg_dec_1ib.a"/tion="cpu/br28/1iba/bfilterfun_1ib.a"/

(6)库文件

爱话 * 养领 U国刨
DAchengcema0918 sdksdk 211_chengcema_git 0918AC701Ncbp
,Dchengcema'sdk_211701n_watch release_v2.1.1vode\sdkAC701Ncbp

<Add ootion="-=cDu/br28/tools/sdk.map"1S

(7)Cbp文件中apps/common/pay/upay_t_head中全部的都需要添加

</Unit>
<Unit filename="apps/common/music/music player.h"/><Unit filename="apps/common/net/1wip_2_1_3/port/LwIP.c"><Option compilerVar="CC"/></Unit>
<Unit filename="apps/common/net/1wip_2_1_3/port/bt_ethernetif.c"><Option compilerVar="Cc"1></Unit>
<Unit filename="apps/common/net/1wip_2_1_3/port/ext_wireless_ethernetif.c"><Option compilerVar="CC"1</Unit>
<Unit filename="apps/common/net/1wip_2_1_3/port/1te_ethernetif.c"><Option compilerVar="CC"/></Unit>
<Unit filename="apps/common/net/1wip_2_1_3/port/sys_arch.c"><Option compilerVar="CC"/></Unit>
开始：<Unit filename="apps/common/net/lwip_2_1_3/port/LwIP.c">
结尾：<Unit filename="apps/common/pay/upay_t_head/soc/softse/utils.h"/>都
需要添加
2023/9/16949:44155,251字节<默认>▼ UTF-B▼ UNIX
全部替换，左边是SE2,02名边是SE1节<默认>▼ UTF-8▼UNIX
<Unit filenane="apps/common/pay/upay_t_head/include/alipay.h"志P , nit f5lenaneaps/comon/pay/upay_t_head/include/alipay,h°/<Unit fi1ename=“apps/comron/pay/upay_t_head/J1_transitcode/transit_other_adapaticnit filename="apps/comman/pay/upay_t_head/inelude/a1 pay_com</Unit><option compilerVar="CC"/1
<unit filenme="aps/common/pay/upay_t_head/include/alipay_iot.
<Unit filenamne="apps/common/pay/upay_t_head/j1_transitcode/transit_task,c"><Option compilerVar="CC"/</Unit
<Unit filename="apps/common/pay/upay_t_head/soe/port/iotsec.h"
<Unit filename="apps/comon/pay/upay_t_head/soc/port/iotsec.h"/<Unit filenane="apps/comron/pay/upay_t_head/soc/se/JL/hsc32i1/hs_private.c"><Option compilerVar="CC"1></Unit
<Unit filename="apps/comon/pay/upay_t_head/soc/se/JL/hsc32i1/
<Unit filename="apps/comon/pay/upay_t_head/soc/se/JL/hsc32i¹/hs_private.h"/<Unit filenane="apps/comon/pay/upay_t_head/soc/se/JL/vendor_cache,c"><Optian compilerVar="CC"/</Unit
<Unit filename="apps/conmon/pay/upay_t_head/soc/se/JL/hsc32i1/<Unit filename="apps/comon/pay/upay_t_head/soc/se/3L/hsc321/<Unit fileame="aps/common/pay/upay_t_head/soc/se/3L/vendor_ci
<Unit filenane="apps/coron/pay/upay_t_head/soe/se/JL/vendor_crypto.c">option compilerVar="CC"/</Unit>
<Unit filename="apps/common/pay/upay_t_head/soc/se/JL/vendor_er
<Unit filanane="apps/comon/pay/upay_t_head/soc/se/3L/vendor_product.c"<Option compilerVar="CC"/</Unit>
<Unit filaname="apps/common/pay/upay_t_head/soc/se/JL/vendor_pr
<Unit filename="apps/comon/pay/upay_t_head/soc/se/JL/vendor_re
<Unit filenane="apps/common/pay/upay_t_head/soc/se/JL/vendor_rot.e"><Optian cmpilervara"Cc"7</Unit>
<Unit filename"apps/comron/pay/upay_t_head/soc/se/JL/vendor_ssp.c"><Option compilervar="cc"7></Unit>714:45默认文本<Unitfilenane="apps/comman/pay/upay t head/include/alipay.h°/29
<Unitfilename="aps/comon/pay/upay_t_head/soc/se/3L/vendor_s
50945
默认文本

(8)网络相关文件

安诂▼大 固 置地中忆+路3李旧时粗Dychengcema\0918 sdksdk 211_chengcema_git 0918AC701N.cbp·D.chengcema'sdk_211\701n_watch release_v2.1.1\code'sdkAC701Ncbp2023/9/169:49:44155,251字节<默认》▼UTF-8▼ UNIX<Unit filename="include_1ib/media/voiceChanger_api.h"/2蓝牙网络拳舒2014013e brmsevsecne-p.h“<Unit filenane="include_11b/net/1te_module/1te_module.h"/<Unit filename="include_1ib/net/1wip_2_1_3/1wip/port/arch/ce.h"/<Unit filename="include_lib/net/1wip_2_1_3/1wip/port/arch/cpu.h"/<Unit filenane="include_lib/net/1wip_2_1_3/1wip/port/arch/sys_arch.h"/<Unit filenane="include_1sb/net/1wip_2_1_3/1wip/port/1wip.h"12<Unit filename="inelude_1ib/net/1wip_2_1_3/1wip/port/lvipopts_bt.h"/<Unit filename="include_lib/net/1wip_2_1_3/1wip/src/include/1wip/_errno.h"/><Unit filename="include_lib/net/1wip_2_1_3/1wip/src/include/1wip/arch,h"1<Unit filenane="include_1ib/net/1wip_2_1_3/1wip/sre/inelude/1wip/autoip.h"1><Unit filename="inelude_1ib/net/1wip_2_1_3/1wip/sre/inelude/1wip/debug.h"/><Unit filename="include_1ib/net/1wip_2_1_3/1wip/sre/include/1wip/def."/<Unit filename="include_1ib/net/1wip_2_1_3/1wip/src/include/1wip/dhcp.h"/<Unit filenane="include_1ib/net/1wip_2_1_3/1wip/sre/include/1wip/dhep6.h"1><Unit filename="inelude_1b/net/1wip_2_1_3/1wip/sre/inelude/1wip/dns.h"1<Unit filename="include_1ib/net/1wip_2_1_3/1wip/src/include/1wip/err.h"1<Unit filename="include_lib/net/1wip_2_1_3/1wip/src/include/1wip/etharp.h"/<Unit filenane="include_lib/net/1wip_2_1_3/1wip/sre/include/1wip/ethip6.h"1><Unit filename="inelude_11b/net/1wip_2_1_3/1wip/sre/inelude/1wip/inet.h"1<Unit fllename="include_1ib/net/1wip_2_1_3/1wip/sre/inelude/1wip/ip.h"/><Unit filename="include_lib/net/1wip_2_1_3/1wip/src/include/1wip/ip4.h"1<Unit filenane="include_lib/net/1wip_2_1_3/1wip/sre/include/1wip/ip4_addr.h"/<Unit filenane="include_1ib/net/1wip_2_1_3/1wip/sre/inelude/1wip/ip6.h"/><Unit filename="include_1ib/net/1wip_2_1_3/1wip/sre/inelude/1wip/ip6_addr.h"/><Unit filename="include_lib/net/1wip_2_1_3/1wip/sre/include/1wip/ip_addr.h"/<Unit filename="include_1ib/net/1wip_2_1_3/1wip/src/include/1wip/mem.h"/<Unit filename"inelude_1ib/net/1wip_2_1_3/1wip/sre/include/1wip/memp.h"/<Unit filename="inelude lib/net/1wiD213/1wip/sre/inelude/1wip/netdb.h"13131:76
开始：<Unit filename="include_lib/net/lte_module/lte_module.h"/>
结尾：<Unit filename="include_lib/system/alipay_iot_tcp/iot_err.h"/>

(9)os_compat.h

(10)DLWIP_USE_BT宏

Ae optacm”-DCONFIG_UCSDuLE”

2.新增加pan网络文件和乘车码文件

全部移植

3.\include_liblsystemlevent.h

!
i
VEV EET EninTue
Ev EuLT Einru ee

4.Net文件移植

5.include_lib\driver\cpu\br28\asm\power\rtc_app.h

include_lib\driverlcpu\br28lasm\power\p33_apph文件中所有

6.\include_lib\driver\cpu\br28\asm\rtc.h

◎chengce patch sdk21...artch

7.\include_lib\driverlcpu\br28\asm\rdec_soft.h

直接移植

8.include_lib\btstack\third_party\rcsp\JL_rcsp_protocol.h

四
chengce patch sdk21.aL_rsp_protocol.h
+的3中口阻邑
会话▼*固★童心/
.glt 0918chengce patch sd22110918lnclude Ib'btstackthird partyArSDNL TCSp protocolL
,D.code'sdklnclude_lib\btstack'third partyvespULresp_protocolh
2023/9/810:14:257,365字节C,C++,C#源代码▼ UTF-8▼UNIX
2023/6/2720:01:367,331字节C,C++,C#源代码▼ UTF-8▼ UNIX
enum{​
enum
L_oPCODE_DATA=0x81,
L_OPCODE_DATA =Bxe1,
DL_OPCODE_GET_TARGET_FEATURE_MAP =8xe2,
JL_OPCODE_GET_TARGET_FEATURE_MAP =0x82,
L_OPCODE_GET_TARGET_FEATURE =0x83,
L_OPCODE_GET_TARGET_FEATURE =0x⁸3,
L_OPCODE_APP_RECORDING=8x@4,
//JL_OPCODESWITCH_DEVICE =0x84,
JL_OPCODE_APP_RECORD_END=0xe⁵,
DL_OPCODE_DISCONNECT_EDR =0x86,
JL_OPCODE_DISCONNECT_EDR =8x86,
L_OPCODE_SYS_INFO_GET =BxB7,
L_OPCODE_SYS_INFO_GET =x⁸7,
DL_oPCODE_sYS_INFO_SET =BxeB,
JL_OPCODE_SYS_INFOSET =8x8B,
L_OPCODE_sY5_INFO_AUTO_UPDATE =0xe9,
L_OPCODE_SY5_INFO_AUTO_UPDATE =8xe9,
JL_OPCODE_CALL_REQUEST =8xa,
JL_OPCODE_CALL_REQUEST =axa,
L_OPCODE_sHITCH_DEVICE =Bxeb,
pL_OPCODE_SMITCH_DEVICE =Dxeb,
DL_OPCODE_FILE_BROWSE_REQUEST_START =BxeC,
DL_OPCODE_FILE_BROMSE_REQUEST_START =8xeC,
L_oPCoDE_FILE_BROMSE_REQUEST_STOP=@xeD,
L_oPCODE_FLE_BROWSE_REQUEST_STOP =0xeD,
DL_OPCODE_FUNCTION_CHD =8x8E,
DL_OPCODE_FUNCTION_CHD =8x8E,
JL_OPCODE_SYS_OPEN_BT_SCAN =8x12,
JL_OPCODE_SYS_0PEN_BT_SCAN =8×12,
LoPcoDE sys UPDATE BT STATUS =8×13.
L OPCoDE SYS UPDATE BT STATUIS =8×13.

9.include_lib\btctrler\btcontroller_modules.h

会话▼
青+的急中l
鱼
D..chengce_patch sdk211_0918Uncude_libbtctrler'btcontroller modules.h
DLNsdk_211701n_watch release_v2.1.1\code\sdknclude_ib\btctrlervbtcontroller_modules.h1
2023/9/810:14349,325字节C,C++,C源代码▼ UTF-8▼UNIX
2023/6/2720:01:338,836字节C,C++,C源代码▼ UTF-8▼ UNIX
… --*/
gbrief ble_rf_adv_fixed_channel
eparan channel_index;指定信道定频；
range B~39 fixed freq,or exff·
*eparan pktent:
adv方式，1次发包的个数：range 1~3
·配置ble的adv状态定频
*/
bool ble_rf_advfixed_channel(u8 channeL_index,uB pktcnt);
…/
@brief bredr_get_rssi_for_addras5
@brief bredr_get_rssi_for_address
*获取已连接设备的r55i
*获取已连接设备的r5si
eparan address对方mac地址
eparan address对方mac地址
ereturn rssi值，range(-127～+127)
ereturn rssi值，range(-127～+127)

10.\cpu\br28\ui_driver\interface\ui_platform.c

③chengce patch_sdk21.@ui platform.e
会话★·固盘国→2+4的3李旧国包
lchencema qit0916cthenoce patch sdk2110919%PDbr28ui drivertinterfaceui platfoma
,D.Isdk_211701n_watch release_v21.1vcode'sdkicpubr28ui drverinterfacelui platformc ·
2023/9/810:14:50160,862字节C,C++,C*源代▼UTF-8▼UNIX
2023/6/27195948160,510字节C,C++,C#源代码▼UTF-8▼UNIX
/*RES_PATH“watchS/watch3.sty”,1
/RES_PATH“watch3/uatch3.sty”,1/
/RES_PATH"watch4/match4,sty",/
/"RES_PATH"watch4/uatch4,sty",!
SAT“atcs/atchs.t”,
/RES_PATH"wtch5/uatch5.sty",/
/”;/
#define WATCHLITEMS_LIMIT
#dafine WATCH_ITENS_LINIT
48
48
CHATCH_ITES_LIHIT+1e/确保>=MATCH_ITEHS_L
(MATCH_ITENS_LIHIT+18)//(确保>=MATCHL_ITEMS_L
#define BGP_ITEMS_LIMIT
#define BGP_ITEMS_LIHIT
#if TCF6_PAY_TRANSITCODE_ENABLE
#define ALIPAY_CARD_FILE
48
#else
define ALIPAY_CARD_FILE
#endif
struct_MATCHLSTYLE{​
struct_MATCHLSTYLE {​
u8 watch_style;
u8 watch_style;
s8 standby_watch_style;
58 standby_watch_style;
);
;
statie struct_MATCHLSTYLE dial_sty;
statie struct_MATCH_STYLE dial_sty;
static u8 watch_itens;
static uB watch_itens;
statie volatile u8 watch update over =0:
static volatile u8 watch update over =8:
prnT(TLe_num:an,T1e_num);
prinTT(T1le_num:o\n”,Tle_num);
if(file_num >=(BGP_ITEMS_LIMIT+ALIPAY_CARD_FLE))《
if(file_num =BGP_ITEMS_LIHIT)《
printf("file num overflow %d\n",file_num);
printf("file num overflow %d\n",file_num);
watch_free(fname_buf);
watch_free(fname_buf);
return-1;
return-1;
​}
I
for(i=0;i<file_num;i++)
for(i=8;i<file_num;i++)(
fname =&fname_buf[i12];
fname =&fname_buf[i12];
for(j=8;j<12;j++)
for(j =8;j<12;j++){​
if(fname[j]= i fname[j]='θ'){​
if(fname[j]
fname[j]'e';
fname[j]='e';
break;
break;
​}
len =root_path_len +fname_len +1+fname_len +suffix_len;len =root_path_len +fname_len +1+fname_lenif(watch_items<MATCH_ITEMS_LIMIT)watch_res[watch_items]=watch_malloc(len+1);watch_res[watch_items]=watch_malloc(len +1);if(watch_res[watch_items]==NULL)if(watch_res[watch_items]==NULL)printf("\n\nmalloc watch list err\n\n");printf("\n\nmalloc watch list err\n\n");watch_free(fname_buf);watch_free(fname_buf);return-1;return -1;strepy(watch_res[watch_items],RES_PATH);strcpy(watch_res[watch_items],RES_PATH);strcpy(&watch_res[watch_items][root_path_len],fname);strepy(&watch_res[watch_items][root_path_len],+watch_res[watch_items][root_path_len+fname_len]/';watch_res[watch_items][root_path_len +fname_lerstrepy(&watch_res[watch_items][root_path_len +fname_len +1],fstrepy(&watch_res[watch_items][root_path_len ++strcpy(&watch_res[watch_items][root_path_len +fname_len +1+fstrepy(&watch_res[watch_itemsj[root_path_len ++watch_res[watch_items][len]=e';watch_res[watch_items][1en]=e';printf("watch list:%s,d,%d\n",watch_res[watch_items],watcprintf("watch list :%s,%d,%d\n",watch_res[wEwatch_items++;watch_items++;printf("watch_items overflow \n");
​}else if(strncmp(fname,"bgP_w",strlen("bgp_M"))-=θ){​​}else if(strncmp(fname,"bgp_w",strlen("bgp_w"))

11.cpubr28\libal下库文件

system.a,alpay_iot_vendor.a等所有库文件
12.appslwatch\ui\lcdlui_sys_param_api.c
13.appslwatch\task_manager\rtclalarm_api.c

并include:"svstem/includes.h"9

14.\appslwatch\task_manager\bt\bt_event_fun.c

chengce_patch sdk21.“1a bt event fun.c

15.\appslwatch\task_manager\bt\bt.c

存在新
会话*·图童 2÷的34□目包
DA.kchengce_patch sdk211_0918appswatchtask_managerbtybtc
,Dxchengcema'sdk 211701n_watch releaseyV2.1.1code'sdkappswatchtask_managerbtbtc☑
2023/9/810:17:0943,016字节C,C++,C源代码▼UTF-8UNIX
2023/6/2719:59:1142,274字节C,C++,C源代码▼UTF-8▼ UNIX
1og_info("BT_STATUS_vDICE_RECOGNITION \n");
1og_info("BT_STATUS_voICE_RECOGNITION n");
bt_status_voice_recognition(bt);
bt_status_voice_recognition(bt);
break;
break;
case BT_STATUS_AVRCP_INCOME_OPID:
case BT_STATUS_AVRCP_INCOME_OPID:
1og_info("BT_STATUS_AVRCP_INCOME_OPID \n");
1og_info("BT_STATUS_AVRCP_IMCOME_OPID \n");
bt_status_avrep_incone_opid(bt);
bt_status_avrcp_income_opid(bt);
break;
break;
case BT_STATUS_RECONN_OR_CONN:
case BT_STATU5_RECONN_O_CONN:
1og_info("BT_STATUS_RECONN_OR_CONN \n");
1og_info("BT_STATUS_RECOWN_OR_CONN\n");
#if USER_SUPPORT_PROFILE_PBAP_LIST
#if USER_SUPPORT_PROFILE_PBAP_LIST
Usar_send_cnd_prepare(USER_CTRL_PBAP_CONNECT,e,NULL);
user_send_cnd_prepare(USER_CTRLPBA_CONNECT,θ,NULL);
#endif
t#endif
if defined USER_SUPPORT_PROFILE_PAN &&USER_SUPPORT_PROFILE_PAN
user_pan_send_cmd(NULL,2,e,MULL);
#endif
break;
break;
default:
default:
log_info(”BT STATUS DEFAULT\n");
log_info("BT STATUS DEFAULT\n");
break
break;
return e;
retrn e)
​}
​}

_this->cmd_flag■0;
_this->cmd_flag·8;
二this->call_flag=8;
this->call_flag=8;
​}
yoid bt_charge_f18g_set(void)
_this->cmd_f¹8g=1;
/**@brief
/**gbrief
蓝牙模式按键响应处理
蓝牙模式按键响应处理
event:按键
@param
event:按键
@param
ereturn
ereturn
1:事件处理B:事件无处理
1:事件处理8:事件无处理
@note
@note
int bt_key_event_handler(struct sys_event *event)
int bt_key_event_handler(struct sys_event *event)
适(5)又件(E)媒揖(E)搜索(B)查看(V)工具(①)碧助(上)
存在新版本
chengce patch scdk21-a btc
会话▼★固盘地→2◆÷的3中旧国箱
..chengce patch_sdk211_0918appswatchtask_manager btbt.c
D\chengcemasdk_211\701n_watch_release_v21.1\code'sdk\apps'watch\task_manager'btbtc 四·
2023/9/810:17.0943,016字节C,C++,CH源代码▼ UTF-8▼UNIX
2023/6/271959:1142,274字节C,C++,C井源代码▼ UTF-8▼ UNIX
void app_bt_task()
void app_bt_task()
{​
{​
int res;
int res;
int msg[32];
int msg[32];
uiupdate_status(STATUS_EXIT_LOMPOMER);
uf_update_status(STATUS_EXIT_LOMPOMER);
extern void setpoweron_idle(u8 idle);
extern int get_poueron_id¹e();
if(1_this->cnd_f1ag)(//鲨牙后台拉回盟牙模式不播放提示音
if(_this->cmd_flag)(//监牙后台拉回蓝牙模式不播放提示音
tone_play_by_path(tone_table[IDEX_TONE_BT_NODE],1);
tone_play_by_path(tone_table[IDEX_TONE_BT_HODE],1);
(P11_DT->CON &BIT(5))
#define WDT_IS_ENABLE()
printf("%s %d",func,MDT_IS_ENABLE());
bt_task_start();
bt_task_start();
if(CONFI6_VTSUAL_BT_F_POMER_LEVEL)
if(CONFIG_VISUAL_BT_RF_POMER_LEVEL)
test_timer =sys_timer_add(NULL,bt_test_timer,1eeee);
test_timer =sys_timer_add(NULL,bt_test_timer,10008);
​}
​}
Mhile(1){​
uhile(1){​
aPp_task_get_nsg(msg,ARRAY_SIZE(msg),1);
app_task_get_msg(msg,ARRAY_SIZE(mS),1);
switch (msg[e]){​
switch(msg[8]){​
case APPNSG 5Y5_EVENT:
case APP_M⁵6_SYS_EVENT:
1284:1
默认文本
126B:1
默认文本
printf("--
printf("

16.两个文件移植过去

JIELI TECHNOLOGY

17.\appslwatch\task_manager\app_common.c

会话▼★固盘地2+÷的3旧目6
D4.Ichengce patch sdk2110918appswatchtask managenapp_commonc
acemascdk 211V/D1n watch release v2.1.1vcode'sdkappswa
nagenapp commons
2023/9/810:17:5224,938字节C,C++,C源代码▼UTF-8UNIX
2023/6/271959:1124,390字节C,C++,C源代码▼UTF-8▼UNIX
return app_PoNer_event_handler(dev);
return app_power_event_handler(dev);
​}
static void app_comnon_device_event_handler(struct sys_event event)
static void app_common_device_event_handler(struct sys_event event)
(
int ret =0;
int ret =0;
const char1ogo■ MULL;
const char1ogo■ NULL;
const char usb_msg =NULL;
const char usb_msg =NULL;
u8 app =0xff;
u8 app =Qxff;
u8 alarm_flag=0;
u8 alarm_flag =8;
switch((u32)event->arg)
suitch((u32)event->arg)
#if TCFG_PAY_ALTOS_ENABLE 88(TCF6_PAY_ALIO5_MAY_SEL==TCF6_PAY_ALTOS_AY_T_HEAD)
case DEVICE_EVENT_FRON_U2A:
extern yoid upayzali_event_handler(struct sys_event·e);
upay2a1i_event_handler(event);
break;
case DEVICE_EVENT_FROM_A2U;
axtern void ali2upay_event_handler(struct sys_event·e);
a1i2upay_event_handler(event);
break;
#endif //TCFG_PAY_ALIPAY_ENABLE
w
□
chengce_patch sdk21.aapp_commone
会话 ▼·图童国◆ 幸的3中口目的
D..chengce patch_sdk211_0918appswatchtask managerapp_commonc
rcemaYsck 211701n watch release V2.1.IccdesdkappswatchMlask managenapp conmean4
2023/9/810:175224,938字节C,C++,C#源代码▼UTF-8▼UNIX
2023/6/271959:1124,390字节C,C++,C#源代码▼ UTF-8▼ UNIX
key =&event->u.key;
key =&event-su,key;
if(key->type -■ KEY_DRIVER_TYPE_VOICE)[
if(key->type ■KEY_DRIVER_TYPE_VOICE){​
/语音消息/
/语音消息/
ret =jl_kus_voice_event_handle(event);
ret =jl_kws_voice_event_handle(event);
break;
break;
​}
​}
aPp_common_key_msg_deal(event);
app_conmon_key_nsg_deal(event);
break;
break;
case SYS_NET_EVENT:
extern int net_event_cb(struct sys_event·event);
net_evant_cb(evant);
break;
default:
defau1t:
printf("unknow event\n");
printf("unknow event\n");
break;
break;
#if自
#if e
//opp传输文件demo
//opp传输文件demo
static FILEfp =NULL;
static FILE*fp =NULL;
attribute((weak))
attrihute((weak))

18.\appslwatch\log_configllib_net_config.c

全部移植
19.\appslwatch\includeluilstyle_JL_new.h乘车码对应的UI page和控件移植
20.appslwatch\common\task_table.c

21.appslwatch\board\br28\board_701n_demo\board_701n_demo_cfg.h

网络控制开关
#define USER_SUPPORT_PROFLE_OPP

22.appslcommon\third_party_profilelcommonlcustom_cfg.h

和\appslcommon\third_party_profilelcommonlcustom_cfg.c添加的部分。
23.appslcommon\paylupay_t_head下所有文件移植
24.Net文件移植
20w0J211J5784地·X北·BoonsC

25.appslcommonlconfig\bt_profile_config.c

conet R edn aat ramota nnn infn-a
ronet iR edn aat ramnta nnn infn-a
除上述文件，可能会有遗漏部分，具体以移植补丁包为准。